How to Make Cadillac Seville SLS 2010 Key with Xtool X300+ X300 Plus?

Original Xtool X300 Plus X300+ Key Programmer with a simple and robust design, to make your vehicle service experience much easier!

Xtool X300 Plus Highlights:

100% Original XTOOL Brand
Support update online
with EEPROM Adapter
Add Special Functions

 

Here Cartool.co.uk engineer has successfully programmed smart key for Cadillac Seville SLS 2010 model. Also if adds key or programs all keys lost for this model are the same operation as below.

For Cadillac pre-2009, you can program key new directly.

While for Cadillac 2009-up, you are required to get security code to access.

How to get Cadillac security code and program key  with X300+?

1.you can use Xtool X300+ X300 Plus key programmer to get security code via OBD (X300 pro will read security code for Cadillac ATS/ATSL/XTS/SRX/SLS till 2015).

2.You use GM MDI Multiple Diagnostic Interface online programming to make this key

3.If you do not have X300, you need to remove dash to get code. We will show this way in detail.

I. Obtain security code

You can disassemble the BCM box to find out 93c86 CPU inside the trunk or remove Rear Integration Module to locate 93c56 CPU(has been verified working by our engineer). Pictures attached below:

 

Here’s the Rear Integration Module, open the box, find out 8-foot chip 93C56 in CPU
Solder and read 93c56 data with ecu programmer,i.e tm100. You can see the security code in Line 0A0, code display as “8552” in ASCII area.

II. Program smart key

Connect the key programmer with vehicle via OBD socket
Select vehicle Cadillac Seville SLS
Follow the menu instructions to enter the security code to program key

Note:

Do not insert the smart card into the car slot during key programming procedure.
The slot is inside the toolbox near the shift lever position.

 

VXDIAG Subaru SSM III Diagnose on Subaru IMPREZA 2004

VXDIAG SUBARU SSM-III Multi Diagnostic Tool supports Subaru diagnostic and Key Programming, also it supports many car software that you can add Toyota, Honda, Porsche, JLR software to this device by purchasing authorization.

Support Multi-languages: English, German, Spanish, French, Italian;
Software Version: V2015.10
Compliant with 12V and 24V communications.

Subaru FreeSSM diagnostic cable for Subaru cars provides a high degree of control over the engine and transmission systems when used with the FreeSSM software.

Here cartool.co.uk technician share the user guide to troubleshoot Subaru IMPREZA 2004 with Subaru SSM III or FreeSSM software.

Model: Subaru IMPREZA 2004

Tools to use: Subaru FreeSSM V1.2.5 diagnostic cable;

VXDIAG Subaru SSM III multi diagnostic tool

1 CHECK ENGINE START FAILURE

1)- Ask the customer when and how the trouble occurred using the check list for interview.

 

2)- Start the engine.

Does the engine start?

YES–> Go to step

NO–> Diagnostics for engine start failure:

i- Check for fuel amount.

ii- Inspection of starter motor circuit.

iii- Inspection of ECM power supply and ground line.

iv- Inspection of ignition control system.

v- Inspection of fuel pump circuit.

vi- Inspection of fuel injector circuit.

2 CHECK ILLUMINATION OF MALFUNCTION INDICATOR LIGHT

Does malfunction indicator light illuminate?

YES–> Go to step 3

NO–> General diagnostics table

3 CHECK INDICATION OF DTC ON DISPLAY

1)- Turn the ignition switch to OFF.

2)- Connect the Subaru Select Monitor or the OBD-II general scan tool to data link connector.

3)- Turn the ignition switch to ON and the Subaru Select Monitor III or OBD-II

scan tool switch to ON.

4)- Read the DTC on the Subaru SSM III or OBD-II scan tool.

Does the Subaru Select Monitor or FreeSSM software indicate DTC?

YES–> Record the DTC. Repair the trouble cause. Go to step 4.

NO–> Repair the related parts.

NOTE:

If DTC is not shown on display although the malfunction indicator light illuminates, perform diagnostics of malfunction indicator light circuit or combination meter:

i- Activation of malfunction indicator light.

ii- Malfunction indicator light does not come on.

iii- Malfunction indicator light does not go off.

iv- Malfunction indicator light does not blink at a cycle of 3 Hz.

v- Malfunction indicator light remains blinking at a cycle of 3 Hz.

4 PERFORM THE DIAGNOSIS

1)- Perform the clear memory mode.

2)- Perform the inspection mode.

Does the Subaru Select Monitor or FreeSSM OBD-II general scan tool indicate DTC?

YES–> Diagnostics Procedure with Diagnostic Trouble Code (DTC):

DTC P0030 HO2S HEATER CONTROL CIRCUIT (BANK 1 SENSOR 1)

DTC DETECTING CONDITION:
Two consecutive driving cycles with fault

NO–> Complete the diagnosis.

What’s more, if you need to add other car model software to the VXDIAG Subaru SSM 3, how to process it?
VXDIAG Subaru SSM 3 interface compatible with other software, customer can add Toyota, Honda, Porsche, JLR software to it. If you want to add one of above software to this interface, please follow this steps to do it:
1) Give me your serial number for activation after make payment
2) We will contact factory to open the toyota software authorization for you
3) After done, we will tell you. Update the new software to this machine.

P.S

 

Newest Update Renault CAN CLIP V160 Released

Latest V160 Renault Can Clip diagnostic software for Renault Dacia Diagnostic Tool has been verified working.

Software version: V160

Renault Can Clip Functions:

Professional diagnosis on ENGINE, automatic gear shifting, Air conditioning system, SRS, ABS, ASR, MPL, GM, IMMO, KEYZESS GO system, OBD-I I and so on.

Renault Can Clip Model Coverage:

Renault 1998-2016

renault-can-clip-v160-new-update-1

Renault CLIP V160 New Added Models:

MEGANE IV SEDAN & KOLEOS II CN/QM6 CN

Update: via CD

Operating system: WinXP

Then how to install and activate Renault Can Clip V160 ?

Let’s check the main steps:

Step 1 – install DAEMON Tools Lite

Step 2 – run Crack Renault CLIP

Step 3 – install CLIP 160

Step 4 – setup CLIP properties

Step 5 – register CLIP

Step 6 – setup in Computer management

Step 7 – diagnose cars via CLIP 160

Renault can clip installation details:

Step 1 – install DAEMON Tools Lite

Insert CAN CLIP 160 disk E: and open it.

Run DTLite application to install

Select a setup language

Accept the agreement

Select Free license

Then follow the screen instruction

DAEMON Tools Lite installation success and runs automatically

Minimize it for later use

Step 2 – run Crack Renault CLIP

Go to DAEMON Tools Lite

Add image: renault can clip disk E:/Clip 160_0_3_0

Go to Computer/renault can clip disk E:/Activation(Patch V3)

Open Crack Renault CLIP registration entries

Register Editor: click Yes.

Click OK.

Back to DAEMON Tools Lite

Mount Clip 160_0_3_0.iso

Minimize DAEMON Tools Lite

close folder Activation(Patch V3)

Step 3 – install CLIP 160

Autoplay: select Run setup.exe

CLIP V160 is running automatically

Click the laptop icon (FIRST INSTALLATION) in CLIP V160 interface.

Click “I accept…agreement” and click Next.

Select country. (here, select OTHER COUNTRY). and click Next.

Select language and click Next.

Manufacturer:Renault. click Next.

Click Next to begin copying files.

Windows security: trust and confirm to install

Finish CLIP installation

Step 4 – setup CLIP properties

Open CLIP properties on Desktop

Open file location:

Cut RSRWin application in local disk C:/ CLIP_X91/ Lib/ Application

Paste RSRWin application on Desktop

Close CLIP properties

Replace RSRWin with another RSRWin application in Computer/renault can clip disk E:/Activation(Patch V3)

Step 5 – register CLIP

Run RSRWin application in local disk C:/ CLIP_X91/ Lib/ Application

Accept the license and register CLIP

Are you part of the Renault Network? Select No.

Enter the unlocking code with the picture guide Renault Clip Registration Step 4 in the folder Activation(Patch V3)

then click Confirm.

Registration successful: click OK.

Replace “RSRWin” in C:\CLIP_X91\Lib\Application with”RSRWin” on Desktop

Prompt: installing device driver software…

Prompt: device driver software installed successfully

Step 6 – setup in Computer management

Automatically install driver software

Open computer management

select Device manager->Bosch automotive service solution device->18-alliance vehicle communication interface

close Computer management

Step 7 – open V160 Renault Can Clip to begin diagnosis

There will be a computer security alert. Just click Cancel.

 

 

Fly OBD Terminator Pin Code Calculation Operate Guide

FLYOBD OBD Terminator Full Version supports Immobilizer + Odometer + CBSReset + Airbag + Sync with free J2534 Softwares like Honda HDS, JLR SDD, TIS, IDS and so on. Also Fly OBD Terminator supports calculate JLR SDD coded access password for locked functions (50 times) and Nissan 20-digit pin code.

OBD Terminator V1.5 Newly Released:
1. Write odometer by OBD for all landrover;
2. Calculate JLR SDD Coded Access Password for Free;

Free Download Fly OBD Terminator PIN_Calculator_setupV1.03.exe
https://mega.nz/#!fl8hzDDL!T0tNkBCNKqhlGtZulAqa7M_01zKplCcclnldadCTs8E

Also you can view the operation instruction on calculating Nissan 20 digit code and Jaguar & Land Rover password by using FLY OBD Terminator full version with FVDI2 quick loader software.

Run FVDI2 quick loader

Select OBD2 terminator-> Tools

select-obd-terminator-1

fly-obd-terminator-display-1

Then Execute PIN Calculator

Enter user name, password, verify code to login

fly-obd-terminator-pin-code-calculator-display-2 fly-obd-terminator-pin-code-calculator-display-3

Click Filter to show all function:

Nissan 20-digit pin calculator

JLR SDD pin calculator

fly-obd-terminator-pin-code-calculator-display-6 fly-obd-terminator-pin-code-calculator-display-7

fly-obd-terminator-pin-code-calculator-display-8

 

How to transfer Nissan 20-digit pre code to 20 digit code ?

Go to Nissan 20-digit pin calculator

Enter 20-digit pre PIN, then click Calculate to get 20-digit PIN

Nissan PIN code calculation completes.

How to read JLR password:

Go to JLR SDD pin calculator

Enter Seed, then click Calculate to get Password

 

JLR password calculation completes.

Update:

In new FVDI2 quick loder versions:

Uses need to select Jaguar or Land Rover first

JLR SDD Coded Access Password for Locked Functions:

1.Jaguar:
CCF EDITOR
ODO APP (X150)
ODO APP (X250)
ODO APP (X351)
SOFTWARE DOWNLOAD
VID BLOCK EDITOR
VIN BYPASS
RECOVER KEYS (X351)
2.Land Rover:
CCF EDITOR
ODO APP (L316))
ERASE KEYS (L322)
ODO APP (L322)
RECOVER KEYS (L322)
OPTION 8
SOFTWARE DOWNLOAD
VEHICLE UPDATE (Only Taiwan models)

Vpecker Easydiag V8.3 Vpecker UI Newest Functions & Models List

VPECKER Easydiag Newest Version V8.3 (Vpecker UI) Update Features:
1. Beautiful action testing display interface.
2. Quick testing and connetion of WIFI.
3. New addition of Hyundai and Kia system into the ESS.

vpecker-easydiag-new-update-functions-july

Vpecker Easydiag New Models Update for Hyundai/Kia Cars till 2015

1. Update for Hyundai Car! Covered up to 2015!
Hyundai DSS—Hyundai ESS—-Hyundai Pro , system V13.0 to V18.0,
give you a more powerful device with new special functions.
Hyundai special functions: 
1. [N] Position The Adaptive
2. A/F Learning
3. A/F Value imposing
4. Auto Detected Configuration Reset
5. BSD Radar Calibration
6. Calibration
7. CLEAR CAN Learnable Status
8. Clutch Learning Reset
9. Current FOB Key Check
10. DCT Manual Input Function(Transmission Exchange)
11. ECM Neutralization
12. ECU Initialization
13. EMS Neutral Mode
14. Engine Test Off
15. EPS Type Recognition
16. ESCL ENABLE OUTPUT CHECK
17. ESCL OPEN STATUS CHECK
18. Get All S/W Version
19. IFU Neutralization
20. ISG TEST(Option)
21. LATERAL G SENSOR CALIBRATION
22. Limp Home Mode
23. LONG G SENSOR CALIBRATION(ONLY EPB)
24. Longitudinal G Sensor Calibration(HAC/DBC Only)
25. Neutral Mode
26. PAD Change Mode(After Change)
27. PAD Change Mode(Before Change)
28. Password Teaching/Changing
29. PRESSURE SENSOR CALIBRATION
30. Read VIN
31. Resetting Adaptive Values
32. Resetting Auto T/A Values
33. Resetting E – CVVT Values
34. Ring Break
35. Sensor Initialization
36. Smatra Neutral Mode
37. Update from CD
etc.
2. Update for Kia Car!Covered up to 2015!
Kia DSS—Kia ESS—-Kia  Pro , system V13.0 to V18.0,
give you a more powerful device with new special functions.

vpecker-easydiag-new-add-kia-models-1

vpecker-easydiag-new-add-kia-models-2

Kia special functions: 
1. [N] Position The Adaptive
2. A/F Learning
3. A/F Value imposing
4. Auto Detected Configuration Reset
5. BSD Radar Calibration
6. Calibration
7. CLEAR CAN Learnable Status
8. Clutch Learning Reset
9. Current FOB Key Check
10. DCT Manual Input Function(Transmission Exchange)
11. ECM Neutralization
12. ECU Initialization
13. EMS Neutral Mode
14. Engine Test Off
15. EPS Type Recognition
16. ESCL ENABLE OUTPUT CHECK
17. ESCL OPEN STATUS CHECK
18. Get All S/W Version
19. IFU Neutralization
20. ISG TEST(Option)
21. LATERAL G SENSOR CALIBRATION
22. Limp Home Mode
23. LONG G SENSOR CALIBRATION(ONLY EPB)
24. Longitudinal G Sensor Calibration(HAC/DBC Only)
25. Neutral Mode
26. PAD Change Mode(After Change)
27. PAD Change Mode(Before Change)
28. Password Teaching/Changing
29. PRESSURE SENSOR CALIBRATION
30. Read VIN
31. Resetting Adaptive Values
32. Resetting Auto T/A Values
33. Resetting E – CVVT Values
34. Ring Break
35. Sensor Initialization
36. Smatra Neutral Mode
37. Update from CD
etc.

 

How to operate Launch X431 V WIFI Bluetooth Diagnostic tablet?

How to use Launch X431 V WIFI Bluetooth diagnostic tablet?
Original Launch X431 V is a multi-language diagnostic tool via WIFI or Bluetooth, which supports up to 69 European, American and Asian car brands full system automotive diagnostics.

LAUNCH X431 V communicates with your car via Bluetooth by DBSCAR connector

x431-v-1

x431-v-2

 

x431-v-3

 

LAUNCH X-431 V hardware features:
Dual core 1GHz Panel PC
Pad design r with a 7 inch multi- touch capacitor screen.
Reasonable PDA design, small size, portable
With front& rear cameras
Built-in battery 3000mha, can endurance 4 hours

LAUNCH X431 V software list:

x431-v-4

x431-v-5

x431-v-9
No download IP limitation: Oversea software download and update available.

More specific info according to brands at following link:
http://www.cartool.co.uk/wholesale/launch-x431-v-full-system-diagnostic-tool.html

LAUNCH X431 V software languages:

English, German, French, Spanish, Portuguese, Polish, Finnish, Swedish, Dutch, Greek, Hungarian, Arabic, Danish, Korean, Japanese, Russian, Turkish, Persian, Romania, Serbian, Czech, Simplified Chinese, traditional Chinese

LAUNCH X431 V main functions:

1.Full system diagnostics, such as electronic control system
2.Read and clear trouble codes
3.Read date stream
4.Special functions include injector test, fuel pump test, purge control solenoid and so on, such as BMW idle study, Injection rate adjustment, battery replacement, Nissan matching key.
LAUNCH X431 V supported car models:

Acura, Changan, Daweoo, Gaz, Hafei, Huachen, Jiao, Lexus, Xiali, Xinkai, Benz, Fiat, Holden, Opel, Peugeot, Saab, Ssangyong, Changhe, Flyer, GMSA, Infiniti, Perodua, Proton, Qirui, Tlisuzu, Zhongshun, EOBD2, Euro Ford, GM, Jaguar, Renault, Smart, Sprinter, USA Ford, VAZ, VW, Changcheng, Dacia, Ford, HaoQing, Jinlong, Liuwei, Rover, ZhongTai, ZhongXing, Bxfiat, HM, Isuzu, Jacty, JPIsuzu, Mazda, Seat, Skoda, Suzuki, BMW, Daihatsu, Mitsubishi, Porsche, Toyota, Volvo, Audi, Chrysler, Citroen, Hyundai, KIA, LANCIA, Land Rover, Nissan, Romeo and Subaru.

How to connect X431 V X-431 Pro?

Locate vehicle’s DLC socket, connect DBScar connector. (Usually the DLC socket lies near center of dashboard or behind the ashtray)

x431-v-7

LAUNCH X431 V operation chart:

x431-v-8

 

How X-431 V use WIFI?

1.Enter main menu screen, choose “Settings”→“Wi-Fi”.
2.Choose “Scan” from the pop-up option menu. X-431 V will start scanning all available Wi-Fi networks.
3.Choose the desired one to connect.

How X-431 V use Bluetooth?

1.Enter main menu screen, click “Settings” → “Bluetooth”.
2.When the Bluetooth switch is ON position, it indicates it is already on and a corresponding Bluetooth icon will appear on the status bar of X-431 PRO.

LAUNCH X431 V is not only diagnostic tool but an intelligent mobile terminal, so more application and services are available:
Photo
Video (record& play)
Multimedia (e.g. music player)
Browser: Built-in Wi-Fi module makes surfing on the internet freely
Settings: To configure your personalized X-431 V through it
Search: Enables you to locate your target quickly and conveniently
Email: Allows you to send and receive email.
External POP3 or IMAP email account: can be added for some common Web email service provider
File Manager: You can manage the files or downloaded files stored in SD card efficiently
Other Additional Functions: Alarm, calendar and calculator etc
Applications: Other android based applications can be customized to install or uninstall
Also these are accessible: Maintenance data base and case library, Instant maintenance information, Public and private maintenance social circle, vehicle diagnostic community

Renault Can Clip V159 Install Feedback on Best Operating System Tested

Which operating system can best work on Renault CAN CLiP v159 (or other old versions)?

Here, the engineers collect the details from some clip users, especially for the issues of unsuccessful installation on Windows 7 64bit and optional solutions of it.

*** Works on Windows XP

Works only Win XP, if you want you need a virtual machine for use this in win 7 but i never tested this

*** Windows 7, work or not

– Works fine on win7 x86.

– Yes, Can Clip runs on Windows 7-x64 and Windows 8….8.1-x64 m because use x-86 files from the system.

– If your version of Windows 7 Home Basic or Home Premium x64 it is normally not work, try Enterprise or Ultimate , I use Win 7 Ultimate x64 and canclip works very well

– Automatically detect a driver in both win7 and in win7-x86-x64, a kind can clip ALIANCE driver, bosch automotive … etc..
is absolutely necessary to have all updates made​to the operating system before installation canclip

– i try install in win 7 x64 pc but the driver of VCI not work

– It is NOT working in my Win7 64-bit

– same issue, not working W7 64bit

 

Why some Renault CLIP cannot work on Widows 7 64bit?

– The Clip software itself works with 64bit version of Windows 7 but the hardware won’t.. Simply because the there are no 64bit drivers for SONDE can clip..

– I think there are no drivers made for 64bit windows…
it works only with 32bit windows

What to do if Renault CAN CLIP cannot work on Windows 64 bit?

-Try disable driver signature enforsment in win 64bit..that help many times

– Or just RIGHT CLICK the .inf File and click INSTALL
Then if you get certificate error you can fix that in device manager/
by right click and install certificate even if invalid

– You need to know your can clip is probe (sonde) or alliance.
alliance = works both on 32 and 64 bit os
probe (sonde) = works only on 32 bit os
i think sonde is better than alliance

You can disassemble your CAN Clip and check it on PCB

Real CAN CLIP PROBE clone – RLT2002

Real-CAN-CLIP-PROBE-Clone-RLT2002

Allianbce hybrid Can Clip sonde – 926573

Allianbce-hybrid-Can-Clip-sonde-926573

Newest Update VVDI Prog Software V4.4.8 Free Download

Original Xhorse VVDI Prog newest software version V4.4.8 released on Cartool.co.uk. VVDI Prog with built-in update software allows user to update VVDIProg firmware timely. Also if you buy VVDI Prog, you will get free BMW ISN read function and NEC, MPC, Infineon etc chip continuously update service.

VVDIPROG V4.4.8 latest update details:
* This version DON’t need update firmware
* Fix some bugs (write or erase operation prompt device error problem)

Free download VVDI Prog V4.4.8 software
https://mega.nz/#!H85gWTKR!54g3BGkJd-E2Juhl6iXZGBqtodK_HGlwPb8t515G65Q
password:123456

V4.4.8 VVDI-Prog customer feedback:

Now Read eeprom 1L02M from EZS A639.545.01.08 and no any problem with new update v4.4.8.

I try 1l15y from bcm1 audi – now read / write ok eeprom and flash.
I did with v4.4.8 BMW E-series 868mhz key and all ok.

How to Code BMW F30 2014 FEM with BMW ICOM and BMW ENET cable?

Here Cartool.co.uk engineer shares one client own BMW F30 2014 owner got problem when change the FEM ( buy a new FEM by BMW, try with Ista P (Icom a2) to coding the FEM. But always failed to that.

But now,  the client find the solution to his problem, and solve the BMW FEM coding with the tech’s guide manual as below.

1. Tools required:

BMW ICOM Device

bmw-icom-a2-diagnostic-programming-tool

BMW ENET cable for connection (Ethernet to OBD)

bmw-enet-ethernet-to-obd-interface-cable-e-sys-icom-coding

Working E-SYS to save the FA from the old FEM. Don’t think you can with ISTA.

ENET (Ethernet to OBD) Interface Cable for BMW E-SYS

E-SYS vs ISTA:

With E-sys you can read and save VO to a file.
If you don’t have ISTA license and you are not online, this is the way you can transfer the car VO to the new FEM.
If you have ISTA licence and you are connected to BMW servers, then ISTA-P will download VO automatically and insert it into the new FEM.

How to code a new FEM ?
1. plug your old FEM (I hope it is not completely dead and you can still read VO from it) read VO and save it to a file with E-sys.
2. Disconnect old FEM and plug new FEM, then connect with ENET cable to the car, go to VCM and load VO from the file you saved previously. Then go to master tab and click “write FA” which will write the car VO to the new FEM.
3. Start ista-p and when you see window for replaced modules click Yes and when you see the list, in the bottom tick FEM. ISTA-p will code(configure) and initialize the new FEM to the car.

How to code an old FRM ?

I have read both, that Immobilizer (EWS4) is an issue for FEM, and that it is not. For sure it is an issue for DME replacement. I don’t think attempting to flash FEM would do anything to DME. Worst case is FEM takes VIN, and still won’t sync / decrypt key with DME.

New FEM coding vs old FEM coding:

The easy way is to order a new FEM from BMW, which they then put VIN and Encryption Key in for your car.

BMW FEM Coding FAQ:

Q: If the method with flashing used FEM will not work, it will be possible to get back to original FEM from my car ?
A: I still have this original FEM.
Flashing used FEM will have no affect on your original one.

Q: Is original FEM will be still compatible with flashed modules ?
A: You could also try flashing original FEM, and see if that doesn’t solve your problem before resorting to the used FEM.

Q: What charger is good for flashing to avoid interruption during process ?

A: Use any charger good for 50 amp minimum.

Q: Need VIN change during FEM flash?

A: VIN is also taken from FA during vo or fdl-coding, usually no need to flash for matching vin.

But Update VCM and MSM I don’t think have to be checked. This is for other purpose. They are not needed when changing vin during a flash. Still they are required when coding a replaced module (after installing it), otherwise svt in vcm will not be corrected.
Above is good point about SVT.

Q: During flashing car engine should be running ?

A: No, it should not be running. You need power supply with 13-15 volts and 50 amps. Other option is to use another car with engine running and jump start cables.

Q: What if during flashing process ignition will switch off ?
What damages to the car this may do?

A: It won’t turn off after the flashing has started.

How to update The Key Pro M8 Key Programmer Tool?

How to update The Key Pro M8 Key Programmer Tool?
the-key-pro-m8-diagnostics-key-programmer-sk142
1. Firstly, must install the M8 driver on your PC which can surf on internet,before updata tokens or new software.
If any question, you can refer to the video ‘M8 install driver record.exe';
2. Connect M8 to your PC via USB cable, and power on your device;
3. Double click ‘M8 Update Tool.exe’.it can automatically identify the Serial Number of your device and you just input Password;
4. Click button ‘open updata file’and load file ‘S1093B1102.m8′,then click button ‘download’ and it lasts about 10 minutes.
If any question, you can refer to the video ‘Update.exe’.
There have new software in this updata file:S1093B1102.m8. and when you test Toyota, no need caculate code.

Notice: This The Key Pro M8 Update Tool V2.0 software is just used for updating M8 software, not for other devices.

Free Download Key Pro M8 Update Tool V2.0

https://mega.nz/#!qtlEWTRR!j9k2uSX5EgWfG1M_Fa7f8boKtLh28twlJ7dKFxPjQl8
key-pro-m8-update-package-display

 

How to install Newest SDP3 V2.27 for Scania VCI2 VCI3 Truck Diagnostic

SDP3 V2.27 Software Newest Update for Scania VCI2 VCI3 Truck Diagnostic Tool has been released on Cartool.co.uk.
Scania SDP3 V2.27  Software Highlights:

Latest SDP3 V2.27 software, works with Scania VCI2, Scania VCI3.
Add more new functions
Without USB Dongle, easier installation
Support Multi-language

Note: SDP3 V2.27 Compatible with Win7 32bit system only
How to setup Scania SDP3 V2.27 ?

1. Install AdbeRDr920_en_us.exe
Install NDP46-KB3045557-x86-x64-Allos-ENU.exe
Install vcredist _x86.exe
Install Scania Diagnos & Programmer 3 2.27.exe

2. Once finishedd, run x32 folder the “install.exe”
6426758 – is password

3. When required allow install.exe to install driver.

4. Run the program.

Video guide to install scania vci2 sdp3 v2.27 

Scania SDP3 V2.27 Software Display
scania-sdp3-v2.27-install-4
scania-sdp3-v2.27-install-2
scania-sdp3-v2.27-install-3
scania-sdp3-v2.27-install-5

 

 

How to Setup VAG Pro V5.5.1 Scanner?

August New Arrival VAG PRO V5.5.1 diagnostic, coding and programming tool runs faster and works better than VAS 5054A ODIS 3.0.3 does. Here Cartool.co.uk engineer share the install guide step by step as below.

VAG PRO Computer requirement:

Windows XP or Windows 7
Processor: 700 Mhz or faster,
256Mb RAM,
1 USB ports available.

Compatible device: VAG Professional Scanner

How to install VAG PRO v5.5.1 on Winxp / Win7 ?

run and install WinRAR 5.31 in Computer/DVD Drive (E:) VCP6

unzip vcp6.rar

copy Driver VCP folder to Desktop

DIFFERENCE:

For Windows XP users, please go to Computer management to select USB human interface device.

For Windows 7 users, select USB input device in Computer management, when USB input device installed (pop-up window)

device driver software was not successfully installed (pop-up window)

then select VCP for Update driver software

browse: Desktop/ Driver VCP

device driver software was not successfully installed (pop-up window)

then select USB serial port for Update driver software

browse: Desktop/ Driver VCP

successfully updated driver software

select USB serial port (COM4) and USB serial converter

then run vag pro application on Desktop

VCP 5.5.1 supports CAN, K-Line, CAN->K-Line, K-Line->CAN

change the software language in setting options

VAG Pro Scanner V5.5.1 supports ECUs: engine, gearbox, abs,a/c, airbag, instruments awd, immo, navi, steering assist, centr. conv. radio, and more

 

go to Engine, then connect

then go to additional function: guided function

 

 

FLY OBD Terminator Support IMMO KM CBS Reset SRS Program

Cartool.co.uk New Arrival FLY OBD Terminator Full Version & Locksmith version includes free J2534 DrewTech Software Honda HDS,Toyota Techstream, JLR SDD,VCM IDS etc.

fly-obd-terminator

Fly OBD Terminator Software Version:
1.Firmware version: V1.072
2.Software version: V1.100

Fly OBD Terminator Features:
Update Online
Software Language: English
Operation system:
Windows XP(SP2 or later) Professional Version,Windows 7 Ultimate and Windows 8 Professional

Fly OBD Terminator full version Functions:

1.Immobilizer function
2.Odometer correction
3.SI reset
4.Airbag (SRS) reset
5.Programming and synchronization
6.Diagnostic function: read & erase trouble codes

Fly OBD Terminator Locksmith version Functions:

1. Immobilizer function
2. Odometer correction
3. Diagnostic function: read & erase trouble codes

Note: The difference between OBD Terminator full and locksmith version is the full version supports additional SI reset, SRS reset, programming and synchronization functions, while the locksmith version doesn’t support.

Fly OBD Terminator Full Version Softwares include:

(Immobilizer + Odometer + CBSReset + Airbag + Sync + Program Free Update Online J2534.

1.Honda HDS V3.016 +
2.JLR SDD V146.00 +
3.TIS V11.00.017 +
4.VCM IDS +
5.J2534 DrewTech Software (Free)

OBD Terminator Software Display:

obd-terminator-software-display-1 obd-terminator-software-display-2 obd-terminator-software-display-3 obd-terminator-software-display-4 obd-terminator-software-display-5 obd-terminator-software-display-6 obd-terminator-software-display-7
Note: 2016 FVDI2 FVD II has OBD Ternimator and Free J2534 software as well.

FLY OBD Terminator support car list:

1. OBD Terminator for VAG – VW, Audi, Seat, Skoda;
2. OBD Terminator for Porsche ;
3. OBD Terminator for Mercedes/Smart/Maybach ;
4. OBD Terminator for OPEL/VAUXHALL ;
5. OBD Terminator for BMW;
6. OBD Terminator for Peugeot/Citroen;
7. OBD Terminator for Fiat/Alfa/Lancia;
8. OBD Terminator for Renault;
9. OBD Terminator for Toyota/Lexus;
10. OBD Terminator for Hyundai/KIA ;
11. OBD Terminator for Nissan/Infiniti;
12. OBD Terminator for GM;
13. OBD Terminator for Ford;
14. OBD Terminator for Volvo;
15. OBD Terminator for Chrysler, Dodge and Jeep;
16. OBD Terminator for Mitsubishi;
17. OBD Terminator for DAF;
18. OBD Terminator for Honda;
19. OBD Terminator for Mazda;
20. OBD Terminator for Chinese Cars;
21. etc;

OBD Terminator models & functions list:

Honda

1.Honda unlock immobilizer system(2001 to 2007 years)
2.Honda unlock immobilizer system(2008 to now years)
3.Honda unlock engine system
4.Honda change VIN to emergency code
5.Honda unlock smart key system
6.Honda odometer
Ford/Mazda
1.Ford/Mazda immobilizer
2.Ford/Mazda module programming for brushing hidden function
3.Ford/Mazda odometer

VAG-VW, Audi, Seat, Skoda
1.VAG-VW, Audi, Seat, Skoda immobilizer Generation 4
2.VAG-VW, Audi, Seat, Skoda immobilizer Generation 5
3.Audi A6/Q7 immobilizer Generation 4.5

BMW
1. BMW CAS1/2/3
2. BMW CAS4/4+
Remark:Automatic recognition models for immobilizer

VAG CAN PRO Powerful VAG Dignostic Tool Replace OEM ODIS

VAG CAN PRO VCP Scanner is a New Arrival VAG diagnostic interface supports CAN BUS UDS K-Line for diagnose programming on Volkswagen Audi Seat Skoda vehicles made from 1990 to 2015. VAG CAN Pro is very good tool for VAG and DGS flash and can completely replaced VAS 5054A ODIS Bluetooth and VCDS. VAG VCP Scanner can do some things that VCDS can’t, OCF will make your life much easier.

VAG CAN Pro with software version V5.5.1 supports new addresses entered in the MLB-Evo platform and contains update database-ODX (support for all models 2015).

VAG CAN Pro Supported Multi-Language: English, German, Czech, Dutch, Italian, Russian, Polish

VAG CAN Pro Main features of VCP(VAG CAN Professional):

* Unique features OCLF service procedures (One-Click-Function);
* inexpensive flasher for VAG;
* inexpensive flasher with support UDS controllers;
* ESP MK60EC1 decision coding blocks;
* a tool for a complete diagnosis MQB platform (Golf VII, Octavia III) Support to 01.2013;
* ZDC-loading containers in the electronic components;
* Unlock video in motion (VIM) on the MQB platform (Discover Pro and MMI-MQB);
* Coding controllers for PR-codes;
* “Login finder” – allows you to scan and logins in the CAN controllers UDS;
* Support for the new Polo in 2014 Facelift;
* Support for the new Passat B8;
* Full support of Audi TT-3 on the platform of the IBC;
* Full support for Skoda Fabia III

OEM ODIS VS VCDS VS Vag Can Pro

OEM ODIS supports every VAG model, but it’s slow and you need online connection for being able to do a lot of things.

VCDS is super fast, best to read DTC’s and do basic stuff and some coding, but it doesn’t work well with new MQB platform.

VCP vag scanner is little bit a mix of those, reads DTC fast, every feature is done offline, and work very well with MQB. The clone VCP USB interface costs €45.00 FREE SHIPPING.

vag-can-pro-can-bus-uds-k-line-vcp-scanner

VCP Canbus scanner contributes to a more stable connection when connected directly to the ECU (Direct Connect), popular among fans VAG

VAG CAN PRO Supported cars:
1. Audi
A2 2009-
A3 8P 2003-
A3 – platform MQB-
A4 model 8E wariant B7 (Engine, transmission, airbags, ABS, park) 2005-
A4 model 8K wariant B8 (UDS + TP2.0) 2008-
A5 model 8K (UDS) 2007-
A6 model 4F 2004-
A8 model 4E 2003-
Q3 (UDS) 2010-
Q5 (UDS) 2008-
Q7 (TP2.0 + UDS) 2006-
S5 model 8K
(R)S6 model 4F
R8 (UDS)
TT model 8J 2007-
2. Mercedes
Sprinter (VW Crafter) – – Only the engine and immobilizer
3. Seat
Altea
Leon MQB 2013-
Leon model 1P 2005-
Toledo model 5P 2004-
Exeo 2008- (Engine, transmission, airbags, ABS, park)
4. Skoda
octavia model 1Z 2004 –
octavia platform MQB –
superb II B6 2008-
fabia model 5J 2007-
yeti 2009-
5. Volkswagen
Crafter (immobilizer, engine)
Caddy model 2K 2005-
Eos
Golf V model 1K
Golf VI model 5K
Golf VII platform MQB
Golf Plus
Jetta II model 1K
Transporter / Multivan (Only after the CAN-BUS drive for storing data)
Multivan/Transporter GP model 7E (UDS) 2009-
Passat B6 model 3C 2005-
Passat CC-
Phaeton GP 2007-
Polo model 6R 2009-
Polo FL MQB 2014-
Scirocco III-
Touran-
Tiguan-
Touareg GP 2007-
Touareg NF 2010

Notes for Audi A4:
1. Option A4 8E B6 model
This model has a can-bus (TP1.6), but it is not connected to the diagnostic socket. The car is fully diagnosed on the K-line (VCP required interface + K). Used protocols KWP2000 and KWP1281 it.
2 .Model A4 8E, B7 option
This model has a CAN BUS TP2.0, but the diagnostic socket is only connected to the so-called CAN-Antrieb, i.e. Engine, transmission, airbags, ABS, Quattro drive.

In addition, a standard K-line. In other words, VAG VCP USB interface fully supports the diagnosis B7 models, but only in the CAN-Antrieb. Other controllers are available through the K-Line and KWP2000 KWP1281 protocols.

XPROG-M V5.60 Read dump from Mercedes W203 EIS Succeed

Here’s  Cartool.co.uk technician shares one customer feedback on using Xprog-m v5.0 to read dump successfully from W203 EIS module, flash and eeprom OK.

ECU: SIM4LKE

Mask: 3K91D

MCU: MC912DC128ACPV

EZS P/N: 209 545 05 08

Type: W211_HC12

Circuit board from AK500 key programmer:

the test points to solder to the EIS board

eis-board
the signal names from this image:

19 -BKGD
7-rest
8-XTAL
24-GND
1-VDDR
26-GND

good connection for your EZS:

hc12

Finally I can read dumps by Xprog. Confirmed, flash and eeprom OK.

Dumps: w211_hc12_ezs.rar

https://mega.nz/#!J5VDzArS!QNncVYvh6TzISkNRCsXE2n4TP6A7etqjDrGowzfsmaY

*** some tips of the EZS: (from a user)

if you can’t connect with SD and dash says ‘—-‘, then is your EZS dead. It could happened when you tried to connect it with xprog, or it went just broken itself. Could be question of flash it and “eeprom it”, but it can be also the MCU is dead. then you’ll need or MCU exchange or use another EZS.

No matter you buy MCU or EZS, you have to do this:

Put in EZS eeprom correct VIN, because otherwise you will have problem with airbag and ecu’s sync (this EZS nr. can be from diesel or petrol car), put there the same km’s like in dash board, otherwise the ‘—-‘ may not disappear, then you’ll need to calc and prog the keys.

After this you’ll need to virginize engine ECU and ESL.
Install everything back, and make it work with SD.

Testing Result on Vpecker Easydiag VS Launch iCarScan

Vpecker Easydiag and Launch iCarScan are both 2016 hottest OBD2 fault code reader. One of cartool.co.uk customer shared his testing results on Vpecker easydiag wifi wireless diagnostic scanner and Launch iCarScan scanner (iDiag’s replacement) on several models.

Tested tool:

VPECKER Esaydiag

vpecker-easydiag-wireless-tool-support-wifi-1 vpecker-easydiag-diagnostic-tool-support-bluetooth-wifi-sp247-b-1 vpecker-easydiag-wireless-tool-support-wifi-3
Launch X431 iCarScan (sometimes i called it iDiag also)

launch-icarscan

Tested model:

Mazda 6 GH 2.0 diesel 2008

Toyota,

Honda,

Scion

Tested results:

Functions
To be honest, Launch iScan have a lot more options on that car then vpecker, for example on engine it can only read few parameters and it can read and clear trouble codes thats it nothing else on engine not even dpf regeneration, idiag have more to offer for that car, i tested on few more cars. I think what it can do more with special functions is for Toyota,Honda,Scion. But since it is original interface and software price is ok for it.

So for now vpecker OBD2 scanner is good because it is even much faster than launch and original for good price ($159), but not even close to Delphi or Launch because of the functions that it cannot do.

Update

VPECKER Esaydiag and iScan fault code reader are updated online via Win XP~Win 10 system. Very very easy to update. So they can work for all cars until 2015.

Language

Vpecker does better in language compatibility, covering 25 main languages worldwide; while Launch seems less, with 9 languages only. So if languages depend on customers, Vpecker will cover more.

Ps. Vpecker language:

Italian, Chinese (Simplified), English, Chinese (Traditional), Japanese, German, Russian, French, Spanish, Portuguese, Polish,Turkish,
Dutch, Hungarian, Korean, Czech, Arabic, Indonesian, Persian, Thai, Vietnamese, Finnish, Swedish, Romanian, Bosnian, etc.

Launch language:

English, French, Russian, Japanese, German, Spanish, Italian, Portuguese, Chinese

In all, each one has its own merits and demerits, but both VPECKER Esaydiag and Launch X431 iCarScan work ok until now. A successful purchase from Cartool.co.uk.

Check More About Vpecker Easydiag at http://www.cartool.co.uk/upload/service/vpecker-easydiag-vs-x431-5c-pro-c68-multidiag-pro.pdf

Original OBDSTAR X-100 Pro Newly Upgrade

New models and functions update for Original OBDSTAR X-100 Pro and X-200 Pro IMMO+Odometer+OBD tool.

x-100-pro-auto-key-programmer-c-d-type

X-100 PRO/OBDSTAR X-200 Pro auto key programmer upgrade:

Adding IMMO programming for X100 PRO:
1) Adding MAHINDRA Xylo IMMO key programming (premiere model);
2) Adding MAHINDRA Scorpio IMMO key programming (premiere model);
3) Adding Maruti 800 IMMO key programming (premiere model);
4) Adding Maruti ALTO IMMO key programming (premiere model);
5) Adding Maruti OMNI IMMO key programming (premiere model);
6) Adding Maruti WAGON R IMMO key programming (premiere model);
7) Adding Maruti VERSA IMMO key programming (premiere model);
8) Adding Maruti ZEN ESTILO (2010) IMMO key programming (starting)
9) Adding Geely Dorsett EC7 (EC7RS) Continental series smart key system 2015- (premiere model);
10) Adding Geely Dorsett GC9 (BRIO) Hella smart Key system (premiere model);
11) Adding Na Zhi Jie large 7 SUV PIN initialization / ICU reset (keys all lost) / ECM reset / learn state detection (premiere model);
12) Adding Na Zhi Jie large 7 MPV PIN initialization / ICU reset (keys all lost) / ECM reset / learn state detection (premiere model);
13) Adding Na Zhi Jie MASTER CEO PIN initialization / ICU reset (keys all lost) / ECM reset / learn state detection (premiere model);
14) Adding Luxgen 5 SEDAN PIN initialization / ICU reset (keys all lost) / ECM reset / learn state detection (premiere model);
15) Adding Luxgen U6 SUV PIN initialization / ICU reset (keys all lost) / ECM reset / learn state detection (premiere model);
16) Adding Luxgen S5 PIN initialization / ICU reset (keys all lost) / ECM reset / learn state detection (premiere model);
17) Adding Luxgen New M7 SUV PIN new initialization / ICU reset (keys all lost) / ECM reset / learn state detection (premiere model);
18) Adding Luxgen New M7 MPV PIN initialization / ICU reset (keys all lost) / ECM reset / learn state detection (premiere model);
19) Adding BAIC BJ40 chip key programming function (premiere model);
20) Adding BAIC BJ80 chip key programming function (premiere model);
21) Adding BAIC D20 chip key programming function (premiere model);
22) Adding BAIC X25 chip key programming function (premiere model);
23) Adding BAIC X35 chip key programming function (premiere model);
24) Adding BAIC X55 chip key programming function (premiere model);
25) Adding BAIC X65 chip key programming function (premiere model);
26) Adding BAIC BJ80 smart key system (premiere model);
27) Adding BAIC X55 smart key system (premiere model);
28) Adding BAIC X65 smart key system (premiere model);
29) Adding 2016 Chevrolet Lova key programming (premiere model);
30) Adding 2016 Chevrolet Lova remote control programming (premiere model);
31) Adding 2016 Chevrolet Malibu smart key programming (premiere model);
32) Adding FAW Hongqi H7 Smart Key programming (PINCODE FREE);
33) Adding ZZNissan, Dongfeng MX6 vehicle IMMO system;
34) Adding Chrysler IMMO system type 3 (13-RAM 1500);
35) Adding Chrysler Smart Key Type 2 (13-Cherokee);
36) Adding Chrysler Smart Key Type 3 (13-RAM 1500);
37) Adding GM Hummer H3 remote control system ;
38) Adding Chang’an CS35 of 2016 models remote control programming type 2;
39) Adding Ford F150 2015- Smart Key programming (PINCODE FREE);
40) Adding Mazda CX4 smart key programming;
41) Adding Chrysler toothless rotary type 2;
42) Adding Zotye Z300 new Joint Industrial IMMO system;

Add mileage adjustment models for X-100 PRO:
43) Adding Porsche 911 2005-2010 mileage adjustment;
44) Adding Porsche Boxster 2005-2010 mileage adjustment;
45) Adding Porsche Cayman 2005-2010 mileage adjustment;
46) Adding Porsche 918 (2015) data recovery;
47) Adding Porsche Cayenne 2010 data recovery;
48) Adding Porsche Panamera 2010 data recovery;

Add Oil/Service reset system for X100-PRO:
49) Adding the English version of GM Oil/Service reset system;
50) Adding MG MG7-L Oil/Service reset system;
51) Adding MG MGTF Oil/Service reset system;
52) Adding MG MG6-EU Oil/Service reset system;
53) Adding MG AP12 Oil/Service reset system;
54) Adding ROEWE 360 Oil/Service reset system;

Add EPB function for X-100 Pro:
55) Adding VOLVO XC70 models EPB function;
56) Adding VOLVO V40 models EPB function;
57) Adding VOLVO V70 models EPB function;
58) Adding BENZ AMG190 models EPB function;
59) Adding BENZ ML/GLE292 models EPB function;
60) Adding BENZ MAYBAKC240 models EPB function;
61) Adding BENZ S217 models EPB function;
62) Adding BENZ S211 models EPB function;
63) Adding BENZ SLR199 models EPB function;
64) Adding BENZ CL216 models EPB function;Add EEPROM adapter for OBDSTAR X100 Pro:
65) Adding MAXUS BCM IMMO pincode to read;
66) Adding DFLIUZHOU engine ECU IMMO pincode to read;
67) Adding LUFENG Fashion engine ECU IMMO pincode to read;
68) Adding Zotye engine ECU IMMO pincode to read (Huf);
69) Adding Subaru Legacy smart system initialization;
70) Adding BAIC D20 engine ECU IMMO pincode to read;
71) Adding Fiat Viaggio IMMO data repair function;
72) Adding Toyota with G chip data recovery function;
73) Adding Toyota with G chip data recovery and initialization function;

Optimal correction for X-100 PRO:
74) Optimized Changhe, Chery, Geely, GM, Toyota and other car IMMO remote programming;

JLR SDD V145 Crack Setup Manual

JLR SDD V145 crack works with Jaguar and Land rover dealer level diagnostic JLR Mangoose.

One customer from Cartool.co.uk shares JLR sdd 145 crack installation guide and testing reports as below.

SSD OFFLINE WORK VERY WELL AND PROGRAMMING MODULE.
SDD works with Land Rover/Range Rover since 2005 and Jaguars from 1995.

Supported devices:

VCM I & II, Rotunda
DA-VIDA J2534/DA-Dongle
JLR Mangoose SDD/JLR Mangoose SDD pro

Requirements:

O.S.: Windows XP; Windows 7
Acrobat Reader 10
Internet Explorer 8 or 9
Hard Drive: 60 GB of available space

Conflicts:
SDD can’t be installed on the same PC with Ford/Mazda IDS and other programs that derived fromFord IDS.

How to setup JLR SDD V145 Crack ?

Install full package – SDD_{version}.00_FULL.exe
Install updates – SDD_{version}.**.exe
Install Land Rover files – VDF_L{A,V}_{version}.exe
Install Jaguar files – VDF_J{A,V}_{version}.exe
Install Pin-point tests – SPA_{version}.exe
If you use 64-bit Windows you MUST run CMD.exe with administrative rights and execute next command:
mklink /D “C:\Program Files\JLR” “C:\Program Files (x86)\JLR”

Install drivers for diagnostic device.
Disabling automatic updates

Need to remove/rename folder:

 

Win7 – “C:\ProgramData\FLEXnet\Connect\Database”
WinXP – “C:\Documents and Settings\All Users\Application Data\FLEXnet\Connect\Database”
Remove message due to the fact that updates not installing

Need to remove/rename file:

Win7 – “C:\ProgramData\JLR\IDS\Log Files\InstallationLog.txt”
WinXP – “C:\Documents and Settings\All Users\Application Data\JLR\IDS\Log Files\InstallationLog.txt”

Available options for engineering mode password calculator:
Land Rover/Range Rover:

CCF Editor
Taiwan Vehicle Update
Software Download
L316/L322 Odometer
L322 Recover Keys
L322 Erase Keys
Option 8
Jaguar

VIN Bypass
VID Block Eitor
CCF Editor
Software download
X150/X250/X351 Odometer
X351 Recover Keys

After clean SDD installation you have 1 day to try it.
To get it working you have 3 ways:

Buy official subscription
Use deep freeze for system to have always 1 day to try
Use some kinds of cracks.

Free download JLR SDD V145 Multi-language

https://mega.nz/#F!o5c0wDxT!nUAfvdex-tGRC796VCsvgw

http://diagnosticdelivery.jlrext.com/idscentral

http://45.59.69.178/JLR/145

 

How to Setup VXDIAG VCX NANO ODIS 3.0.3 VAG ?

The newest ODIS 3.0.3+ Postsetup 9.3.10 diagnostic software works for VAG group VW Audi Skoda Seat Bentley Lamborghini has been verified working perfect with VXDIAG VCX NANO 5054 WiFi version interface.

Here let’s view installation guide on ODIS-Service 3.0.3 setup on Windows 7 (both 32-bit and 64-bit).

Basic info:

– software version: ODIS 3.0.3 Postsetup 9.3.10

– O.S.: Windows 7 system

– connection WIFI / USB

– Better than VAS 5054A

How to install VAG ODIS 3.0.3 step by step?

1 run OffboardDiagnosticSetup-Service_3_0_3 application and install ODIS 3.0.3

(license in license.dat)

 

2 replace OffboardFiagLaunch application in disk C: with that in ODIS 3.0.3 disk F:

3 run ODIS 3.0.3 on Desktop and setup Postsetup 9.3.10 (about 1 hour)

Enter PostSetup user name (default: abc) and keyword (default:123)

Select Setup language

 

4 softing vehicle interface setup: VAS5054

5 run ODIS 3.0.3 for Diagnosis on 3C Passat sedan 2007

 

WIFI Version VXDIAG VCX NANO ODIS 3.0.3 Testing on Passat 3C

2016 WiFi VXDIAG VCX NANO 5054 ODIS is a new arrival OEM tool of VAS 5054A, works with VW,AUDI, Skoda, Seat, Bentley and Lamborghini. The vxdiag 5054 odis supports latest ODIS V3.03 Software with Multi-languages

Here is test report shared by our client who do diagnose on a Passat 2007 with Vxdiag Vcx Nano Odis 3.0.3.

Tested Tool : new VXDIAG VCX NANO 5054 wifi version

wifi-version-vxdiag-vcx-nano-5054a

Software version: ODIS-Service 3.0.3 Postsetup 9.3.10 (latest)

wifi-version-vxdiag-vcx-nano-5054a-01

Tested Vehicle : 2007 Volkswagen Passat sedan 3C

ODIS 3.0.3 Test result:

NOTE:

The technician test it on WINDOWS 7 32 bits (WIN 7 64 bits also ok)

System C: // have to be NTFS format

C: // need to have at least 40GB space for installing ODIS

Manage to read/clear faults and some other diagnosis on this Passat

 

ODIS 3.0.3 tested ok!

 

It’s verified that VW Audi VAG ODIS 3.0.3 has improved a lot compared with ODIS 3.0.1:

– Estimated remaining times are shown for ECU flash operations.
– Diagnostic protocol contains interruptions of GFF sessions, extended measurement values, improved ECU communication view, used diagnostic hardware, connection type of diagnostic hardware, operating system, the hotfix used and submissions of support requests
– The measured value display has been improved.
– Documents in GFF are displayed in separate windows.
– One message box will be shown at the beginning of the test drive mode.
– GFF hotfixes can be integrated during diagnostic sessions.
– Danger messages have been revised.
– Stopping of diagnostic sessions may be interrupted.
– Automatic deletion of autosave diagnostic protocols after successful transmission.
– Selection of PassThru diagnostic hardware has been improved.
– ODIS Service Software update has been stabilized.

ODIS 3.0.3 can work with VXDIAG VCX NANO WIFI version and also being tested on VAS 5054A and 5054 plus in future soon.