K+DCAN cable with switch pin 7&8: Good or Not?

What is K+DCAN cable with switch:

It’s a BMW K+Dcan usb cable, the 2018 version.

In detail… Look here:

bmw-inpa-can-with-ft232rq-chip-with-switch-6

A new switch is added, compared to the traditional Dcan cable.

kdcan-inpa-cable-switch

the switch on this cable to LEFT is for 7 pin, to RIGHT for 8 pin
8 pin for K-LINE communication (old DCAN cables cannot do it) for BMW from 1998 to 2008

Upload images…

Traditional Dcan cable:

http://www.cartool.co.uk/wholesale/new-bmw-inpa-k-can-with-ft232rl-chip.html

New K+Dcan cable with a switch and FT232RQ chip:

http://www.cartool.co.uk/wholesale/bmw-inpa-can-with-ft232rq-chip-with-switch.html

 

Why do you need K+Dcan pin 7& 8?

I assume the reasons being that on DCAN cars one pin is used for a ethernet connection and the other to the K data line – on K line cars, both pins are connected to K data lines and that creating a switch mode circuit would cost more than the interface is worth. The 2 most sensible options are both hardware-related:-

Use an adapter (such as the one sold by One Stop electronics) which internally bridges pins 7 & 8 or…
Mount a small switch on the OBD plug end of your adapter, which can bridge (for K line) or separate (for DCAN) the connection between pins 7 & 8.
How to use/switch/connect to K-Line or Dcan pin 7&8?

Q: So you have to physically connect (K-Line) or disconnect (DCAN) pin 7&8?

A: Yes, I think connection by soldering is a bad option as it limits the usefulness of the interface, I have an adapter but consider a switch to be a better option.

Q: Is there anything else to do for switching from K-Line to DCAN then disconnecting pin 7&8? Unfortunately I don’t have a DCAN model available.

A: As soon as you connect the interface to the car and your computer, run DCAN.exe to configure the comms rate. I have only used my K+DCAN interface with DCAN cars.

Q: Is it necessary to do so every time I want to use DCAN or is the interface staying in DCAN mode once I ran DCAN.exe?

A: You only need to run it when you are switching between modes. If you run it the first time you connect to a DCAN car, your computer will retain the settings.

Q: How do I switch back to K-Line? Just by connecting the two pins or is further action on the computer required?

A: Earlier e39 had both the OBD port in the cabin and the round 20 pin connector under the hood.

The OBD port only allowed access to limited modules, I think only the DME in fact.

I always switch my K+D CAN adapter between K and D CAN protocols as I need to, depending on the car that I’m connecting to.

I use the DOS version of the DCAN utility. As mentioned if you only use the adapter on the e39, run the utility once and set the adapter to K CAN and leave it at that.

In fact thinking about it I use the same adapter for INPA, DIS and ISID.

With these K DCAN cables there are two subtle different versions, one with pin 8 enabled, one with it disabled. The one with it disabled is ideal for e90 newer than 03/07 & that era, these leads often come with a black adapter to re-enable the pin 8 (by just tying it to pin 9) so it will also be suitable for e46/e39/e63 etc. The ones with pin 8 active are just older versions of the cable. Worst cast scenario you just need to modify the cable & stuck a switch on it to toggle pin 8 on/off as needed.

Finally there are a lot of rubbish adapter cables out there. Finding a good one can be tricky.

Q: I have a 2003 E39 so there is no OBD1 anymore. How do you switch the modes physically? Do you use such a adapter to connect Pin 7&8?

A: If you don‘t plan to use the cable on any cars that have DCAN(2007+) then you can pop open the case and solder a jumper between them. When you do this the DCAN functionality will no longer work though.

For more details, pls find from www.cartool.co.uk

Lonsdor K518ISE 2017 Most Powerful Auto Key Programmer Replace SKP1000

2017 Most Powerful Lonsdor K518ISE Key Programmer Replace SKP1000 Main Functions:

1. Immobilization for all makes
2. Odometer adjustment
3. Built-in-in Volkswagen 4th 5th adapter
4. Built-in Chip & remote detection module
5. Toyota/Lexus smart key for all key lost via OBD

Lonsdor K518ISE Cars Coverage List for Immobilization:

Europe:
Audi, BMW, Benz, VW, Volvo, Citroen, Ferrari, Maserati, Fiat, Lamborghini, Jaguar, MG,Land Rover, Bentley, Lancia, Opel, Peugeot, Porsche, DS, Renault, Alfa Romeo, Smart,Borgward

America:
Cadillac, Chevrolet, Dodge, GMC, Buick, Hummer, Ford, JEEP, Lincoln, Mercury

Asia:
Honda, Hyundai, Isuzu, KIA, Lexus, Mazda, Mitsubishi, Nissan, Ssangyong, Subaru, Suzuki, Toyota, Shigaoka Queen

China:
Iveco, Trumpchi, BYD, Geely, Chery, Great Wall, Young Lotus (Basically all Chinese car models are included)

Odometer Adjustment Car List:
VW, Porsche, Ford, Jaguar, Land Rover, Mazda, Audi, Renault, Hummer, Hyundai, Kia…
Note: more high-end cars will be updated very soon.

Immobilization interface

londor-k518ise-immobilization-interface
Odometer adjustment interface

londor-k518ise-odometer-adjustment-interface

Lonsdor K518ISE Setting interface:

setting-interface

SKP1000 Tablet Key Pro All Keys Lost Work OK on Subaru Forester 2011

How to program key on Subaru Forester 2011 all keys lost with SKP-1000 tablet key programmer via OBD?

 

Guide:

skp1000-Subaru-forester-all-key-lost-01

Connect SKP1000 auto key programmer with vehicle diagnostic socket
Select Immobilizer function
skp1000-Subaru-forester-all-key-lost-02
Select Subaru->Key A Type-> Immobilizer

Select OBDII connector
Turn ignition to ON position
Press YES to continue
skp1000-Subaru-forester-all-key-lost-03
Select All Keys Lost
Configuring
skp1000-Subaru-forester-all-key-lost-04
SKP-1000 will prompt whether to program next key?
Press YES to continue
skp1000-Subaru-forester-all-key-lost-05
Insert a new key
Turn ignition ON
Press YES to continue
Program success.

skp1000-Subaru-forester-all-key-lost-06

FVDI 2 and FLY OBD Terminator New Update Ford V106 Honda V3.102

FVDI 2 and FLY OBD Terminator New Update V4.3 Features:
2017-6-26

1. Quick Loader V3.9

* Add support for IDS for Ford V106
* Add support for HDS for Honda V3.102

2. OBD Terminator
* Bug fix

FVDI 2 Commander Full Version Total 28 Car Softwares Newly Update – UK Best Car OBD2 Tools Center

FVDI 2 Commander Full Version Supports multi-brands vehicles include:

VAG, Mercedes, Porsche, Opel, BMW, Peugeot, Citroen, Fiat, Renault, Toyota, Lexus, Hyundai, KIA, Nissan,
Ford, Volvo, Chrysler, Dodge and Jeep, Mitsubishi, and TAG Key Tool, and DAF, Bike, Snowmobiles and Water scooters.
FVDI 2 support car list and Version information:

1. Abritus FVDI for VW, Audi, Seat, Skoda, V24.0;
2. Abritus FVDI for Porsche, V4.1;
3. Abritus FVDI for Mercedes/Smart/Maybach, V7.0;
4. Abritus FVDI for OPEL/VAUXHALL, V6.5;
5. Abritus FVDI for BMW, V10.4
6. Abritus FVDI for Peugeot/Citroen, V6.7;
7. Abritus FVDI for Fiat/Alfa/Lancia, V5.7;
8. Abritus FVDI for Renault, V6.3;
9. Abritus FVDI for Toyota/Lexus, V9.0;
10. Abritus FVDI for Hyundai/KIA, V2.1;
11. Abritus FVDI for Nissan/Infiniti, V4.3;
12. Abritus FVDI for TAG Key Tool, V6.2;
13. Abritus FVDI for Ford, V4.9;
14. Abritus FVDI for Volvo, V4.3;
15. Abritus FVDI for Chrysler, Dodge and Jeep, V3.3;
16. Abritus FVDI for Mitsubishi, V2.1;
17. Abritus FVDI for DAF, V1.0;
18. Abritus FVDI for Bikes, Snowmobiles and Water scooters, V1.2;
Note: Abritus FVDI commander softwares 18 items (from 1 to 18);

19. FLY OBD Terminator FULl ALL Functions, V4.0 ( FLY OBD Terminator);

20. J2534 Software for Honda HDS, V3.102;
21. J2534 Software for Toyota TIS, V12.00.124;
22. J2534 Software for Ford VCM IDS, V106;
23. J2534 Software for Mazda VCM IDS, V104;
24. J2534 Software for Jaguar JLR SDD, V149;
25. J2534 Software for Landrover JLR SDD, V149;
Note: J2534 Softwares 6 items (from 20 to 25);

26. Plugin VVDI2 VAG, VVDI2 V1.2.2 and VVDI2 V4.2.1;
27. Plugin VVDI2 BMW, VVDI2 V1.2.2 and VVDI2 V4.2.1;
28. Plugin VVDI2 Transponder Programmer, VVDI2 V1.2.2 and VVDI2 V4.2.1;
Note: Plugin VVDI 2 Softwares 3 items (from 26 to 28);

How to setup V17.04.27 wiTech MicroPod 2 Newest Software?

How to setup V17.04.27 wiTech MicroPod 2 Newest Software?

1   installation  AdobeAIRInstaller.exe
2   installation  jre-6u45-windows-i586.exe
3   installation  wiTECH_Install_17.04.27.exe
4.  Restart the computer

WARNING:

1. The computer on the day of the date
2. The computer must be connected to the Internet
3. Connect the machine to the device to open the software
4. Tip registration, Turn off the software and turn it on Repeat several times You can use it normally

V17.04.27 wiTech MicroPod 2 Newest Software Free Download
https://mega.nz/#!Nm5QRQYR!fVPAE7SNtYa2iE5eqQaZ1zyW7A1nh94-vPGpK1Iu3lg
 

How to use OBDSTAR X300 DP plus RFID Adapter to do Audi A6L 4th IMMO?

As recently Original OBDSTAR Tools Dealer release new arrival RFID Adapter for VW Audi 4th 5th immo function, can now be tested with Obdstar X300 dp/dp/x300 pro3/x100 pro, etc.

Here our engineer share the operation video on use OBDSTAR X300 DP Pad with Rfid Adapter (most powerful and cost-effective) to program new key for Audi A6L 4th IMMO.

1. Turn on ignition with dealer key and read out eeprom data thru 9S12DT256 for Audi A6L.1 2 3 4 5 6 7 8 9 10 11 12

2. Save the EEPROM data, then generate CS code and PIN code from EEPROM data thru 9S12DT256.

13 14 15

3.Generate Dealer Key from the EEPROM data(Bin file) and do Key Data Learning with OBDSTAR RFID Adapter Chip Reader.

Note:
a.Put the new key into OBDSTAR RFID Adapter;
b.Backup EEPROM before key learning;

16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

4. After key learning done, test the new key to turn on the ignition.

8 how-to-use-obdstar-rfid-adapter-with-obdstar-x300dp-to-do-audi-a6l-4th-immo-32 how-to-use-obdstar-rfid-adapter-with-obdstar-x300dp-to-do-audi-a6l-4th-immo-33

5. Test OK.

OBDStar X300M Security Verification Failure Solved

When used the OBDStar X300M to do odometer correction function on OPEL Astra 2010, it come out the error “Security Verification Failed”,

obdstar-x300m-security-verification-failed

How to solve the X300M security verification failure ?
When it fails to communicate or program, please operate as below:

1.Connecting x300m — Starting it-Pressing option-Pressing Data Logging-Pressing on-Pressing ESC – Back to the main menu.
2.When it fails to program, power off the machine please.
3.Pull our TF card where there is a LOG file.
4.Send us the LOG file and the engineer would study the data and figure out the reason.

Launch X431 V 8inch Tablet 2017 Newest Special Functions Models

 

 

 

 

 

 Launch X431 V 8inch Tablet supports special Functions cover more than 10 kinds of special functions works OK with x-431 V 8inch: Brake reset, Oil reset, SAS Rest, BAT reset, Bleeding , Elec. throttle Relearn, TPMS reset, DPF reg. , Gear learning, IMMO, etc. (Better than old X431 tools)

buy-launch-x431-v-8inch-special-functions-list

Here’s the display of  the newest models&special functions  of Launch X431 V 8” diagnostic tool.

X431 V 8inch tablet with OBD2 full system and special functions works with many vehicles(Ford, Toyota, Mercedes Benz, BMW, VW, Toyota, etc.) brands up to 2017 year. For example,

1. Ford Models&Special Functions

Support Ford models till 2017, support f-650,  f-750 test, and special functions, ford module programming(ACM, CDP) as well.

X431 v 8inch support Ford system includes PCM, ABS, 4WAL, RCM, EATC, ECS, IABM, RAP, 4X4, 4WAS, CTM, OTC, ICM, PATS, ARC, LCM, DDM, ect.

launch-x431-v-8inch-ford-2017-functions-list

launch-x431-v-8inch-ford-2017-functions-list-2 launch-x431-v-8inch-ford-2017-functions-list-3 launch-x431-v-8inch-ford-2017-functions-list-4

 

2. Honda Models&Special Functions

Supports honda diagnose programming and special functions like write win, replace ecm/pcm,crank(ckp) pattern clear, crank(ckp) pattern learning, throttle learning, Motor Rotor Position Calibration (IMA), Readness Codes, etc.

Supports honda models on PGM-FI/Diesel(engine system) cover ECM/PCM reset, read data stream, read freeze frame, actuation test, special functions(service reminder, throttle learning, air bleeding, sensor calibration, immo,etc.)

 

 

launch-x431-v-8inch-honda-functions-list launch-x431-v-8inch-honda-functions-list-2 launch-x431-v-8inch-honda-functions-list-3 launch-x431-v-8inch-honda-functions-list-4

 

3. Mercedes Benz Models&Special Functions

Supports Mereceds Benz models with special functions includes Brake pad reset, ABS Bleeding, Electronic throttle sensor reset, Tire pressure sensor reset, Regeneration of diesel particulate filter, etc.

 

 

 

 

launch-x431-v-8inch-mercedes-benz-functions-list launch-x431-v-8inch-mercedes-benz-functions-list-2

 

4. BMW Models&Special Functions

Supports BMW models up to 2017 year, BMW coding/programming and key programming, BMW idle study, BMW injection rate adjustment, BMW battery replacement.

buy-launch-x431-v-8inch-bmw-car-coding-2017

5.VW Models&Special Functions

Supports VW online programming works fine, you need no subscribe account to login Germany server.

buy-launch-x431-v-8inch-vw-car-online-programming-2017

 

6.Toyota Models&Special Functions

Supports Toyota models up to 2017 year, A/T registration, Electric throttle learning and write VIN OK;

buy-launch-x431-v-8inch-toyota-car-special-function-2017

 

To be continue…

Pay attention, soon we will release more models&functions list of Launch X431 V 8inch pad tablet diagnose prorgamming tool.

How to do one-key update for obdstar tools ?

How to update obdstar tools with one-key on official website ?

Here is the detail step-by-step instruction about one-click update software.

Step 1: Remove the TF card from your device.

Insert your TF card into computer.

Format your TF card and ensure it is empty.

obdstar-tools-one-key-update-display-1

Step 2: Login our website en.obdstar.com ,and click “One Key upgrade”

Step3: Download and install the “One Key upgrade”.

You will see this software.

obdstar-tools-one-key-update-display-2

Step4: Open the “one key upgrade”.

Input your username and password. Then select “End User” and click “Log in”.

obdstar-tools-one-key-update-display-3
Step5: Input your S/N.

obdstar-tools-one-key-update-display-4

Step6: Select all and click “Upgrade”.

obdstar-tools-one-key-update-display-5

obdstar-tools-one-key-update-display-6

obdstar-tools-one-key-update-display-7

Step7: Upgrade is completed.

obdstar-tools-one-key-update-display-8

Step8: Open your TF card. You will see these files.

obdstar-tools-one-key-update-display-9

Step 9: Remove the TF card from the computer. Insert your TF card into the device.

Update succeed!

How to register OBDSTAR X300 DP PAD Tablet ?

OBDSTAR X300 DP PAD Tablet Register Guide

(free download obdstar-x300-dp-pad-tablet-register-guide.pdf )

Step 1. Connect your VCI with the main cable and the 12V power as follows

obdstar-x300-dp-pad-tablet-register-display-1

Step 2. Turn on tablet and connect with VCI.

1. Situation 1— In general, it will connect with VCI automatically after turning on the tablet as follows:

obdstar-x300-dp-pad-tablet-register-display-2

2. Situation 2—If your tablet didn’t connect with VCI automatically, please operate as follows:
Click “setting”—Enter “Bluetooth”—Click the Bluetooth name of VCI to connect

obdstar-x300-dp-pad-tablet-register-display-3
obdstar-x300-dp-pad-tablet-register-display-4

obdstar-x300-dp-pad-tablet-register-display-5

obdstar-x300-dp-pad-tablet-register-display-6

Step 3. Registration

1. Enter ”DP”;
2. Enter “Setting”;
3. Begin to register;
4. Fill in the registration information;
5. Register successfully
obdstar-x300-dp-pad-tablet-register-display-7

obdstar-x300-dp-pad-tablet-register-display-8
obdstar-x300-dp-pad-tablet-register-display-9
obdstar-x300-dp-pad-tablet-register-display-10
obdstar-x300-dp-pad-tablet-register-display-11

How to add car software with special function to Launch M-diag Lite Plus ?

Launch M-diag Lite Plus Software with Special Functions Purchase Methods

There are 2 ways to choose the software&special functions of launch m-diag lite plus you need.

1. Choose the vehicle brand to work with

After purchase the vehicle type, it will show what special functions the m-diag lite plus can work with.
Some vehicles include about 11 kinds of special functions. What’s more, the functions like activate test, change vin it may cover.

2. Choose the special function you need

After purchase the special function(cost 39.95USD/each function), then you can choose all car models among the car list from the function menu.

P.S

The Launch M-diag lite scanner for Andriod IOS system include 11 kinds of special functions:

DEMO, EOBD2, Oil / Service reset, brake pads reset and steering angle reset;
Reset sas, reset oil, elec.throttle rlrn, immobilizer/keys, reset tpms, injector, bleeding, dpf, gear learn, reset bms, reset brake.
launch-m-diag-elite-plus-special-functions-list launch-m-diag-elite-plus-special-functions-list-02

 

Latest Vpecker UI Easydiag XTUNER OBDII update to V8.9

Latest Vpecker UI Easydiag XTUNER OBDII update to V8.9
1. Add VCI WIFI connection function in the Setting, which helps to check the WIFI connection.
2. Demo setting moves to the diagnostic software information windows.
We have been insisted on solving the problems of customers about our products and improving Vpecker in all aspects.

vpecker-ui-v8.9-new-update-1

vpecker-ui-v8.9-new-update-2

vpecker-ui-v8.9-new-update-3

vpecker-ui-v8.9-new-update-4

OBDSTAR Tools Newest Models Functions List for IMMO ODO DPF Reset

OBDSTAR Tools Newest Add Models Functions List for IMMO ODO DPF Reset

Adding IMMO programming:

1) Adding southeast DX7 password programming;
2) Adding Roewe RX5 mechanical key pincode free programming;
3) Adding Great Wall C30 remote control programming;
4) Adding Luxgen pincode to read;
5) Adding Baic magic speed H6 IMMO remote control programming;
6) Adding Baic magic speed S2 / S3 IMMO remote control programming;
7) Adding Baic magic speed S3L IMMO remote control programming;
8) Adding Chrysler free light IMMO programming and pincode reading;
9) Adding Toyota IMMO remote control programming;
Steering angle reset
Benz
Passenger cars:
10) Adding Benz 169-A series (before 2005.11) steering angle reset learning;
11) Adding Benz 169-A series (2005.12 later) steering angle reset learning;
12) Adding Benz 245-B series (before 2005.11) steering angle reset learning;
13) Adding Benz 245-B series (2005.12 later) steering angle reset learning;
14) Adding Benz 203-C series (before 2003.08) steering angle reset learning;
15) Adding Benz 203-C series (2003.09 later) steering angle reset learning;
16) Adding Benz 204-C series steering angle reset learning;
17) Adding Benz 215-CL series (before 2002.08) steering angle reset learning;
18) Adding Benz 215-CL series (after 2002.09) steering angle reset learning;
19) Adding Benz 216-CL series steering angle reset learning;
20) Adding Benz 203-CLC series (after 2008.01) steering angle reset learning;
21) Adding Benz 209-CLK series (before 2004.03) steering angle reset learning;
22) Adding Benz 209-CLK series (after 2004.04) steering angle reset learning;
23) Adding Benz 219-CLS series (before 2005.05) steering angle reset learning;
24) Adding Benz 219-CLS series (2005.06-2006.05) steering angle reset learning;
25) Adding Benz 219-CLS series (after 2006.06) steering angle reset learning;
26) Adding Benz 211-E series (before 2005.05) steering angle reset learning;
27) Adding Benz 211-E series (2005.06-2006.05) steering angle reset learning;
28) Adding Benz 211-E series (after 2006.06) steering angle reset learning;
29) Adding Benz 463-G series (16-pin diagnostic seat) (before 2004.03) steering angle reset learning;
30) Adding Benz 463-G series (16-pin diagnostic seat) (2004.04-2006.08) steering angle reset learning;
31) Adding Benz 463-G series (16-pin diagnostic seat) (2006.09-2007.02) steering angle reset learning;
32) Adding Benz 463-G series (16-pin diagnostic seat) (after 2007.03) steering angle reset learning;
33) Adding the Mercedes X164-GL series steering angle reset learning;
34) Adding Benz X204-GLK series steering angle reset learning;
35) Adding Benz 163-ML series steering angle reset learning;
36) Adding Benz 164-ML series steering angle reset learning;
37) Adding Benz 251-R series steering angle reset learning;
38) Adding Benz 220-S series (before 2002.08) steering angle reset learning;
39) Adding Benz 220-S series (after 2002.09) steering angle reset learning;
40) Adding Benz 221-S series (before 2009.06) steering angle reset learning;
41) Adding Benz 221-S series (2009.07 later) steering angle reset learning;
42) Adding Benz 230-SL series (before 2003.08) steering angle reset learning;
43) Adding Benz 230-SL series (2003.09-2008.02) steering angle reset learning;
44) Adding Benz 230-SL series (after 2008.03) steering angle reset learning;
45) Adding Benz 170-SLK series (16-pin diagnostic seat) steering angle reset learning;
46) Adding Benz 171-SLK series (2005.05 before) steering angle reset learning;
47) Adding Benz 171-SLK series (after 2005.06) steering angle reset learning;
48) Adding Benz 199-SLR series steering angle reset learning;
49) Adding Benz 240-Maybach steering angle reset learning;
Commercial vehicles:
50) Adding Benz VITO / VIANO 639 steering angle reset learning;
51) Adding Benz VANEO 414 steering angle reset learning;
52) Adding Benz SPRINTER II 90X.6 steering angle reset learning;
Volvo
53) Adding Volvo C30 steering angle reset learning;
54) Adding Volvo C70 Conv steering angle reset learning;
55) Adding Volvo S40 steering angle reset learning;
56) Adding Volvo S60 steering angle reset learning;
57) Adding Volvo S80 (07-) steering angle reset learning;
58) Adding Volvo V40 steering angle reset learning;
59) Adding Volvo V50 steering angle reset learning;
60) Adding Volvo V60 steering angle reset learning;
61) Adding Volvo V70 steering angle reset learning;
62) Adding Volvo V70XC steering angle reset learning;
63) Adding Volvo XC60 steering angle reset learning;
64) Adding Volvo XC70 steering angle reset learning;
65) Adding Volvo XC90 steering angle reset learning;
66) Adding Volvo XC90 GGD steering angle reset learning;
Buick
67) Adding Buick Hideo steering angle reset learning;
68) Adding Buick GL8 Deluxe Edition steering angle reset learning;
69) Adding Buick Regal turn to the corner to reset the learning;
70) Adding Buick LaCrosse turn to the corner of the learning;
71) Adding Buick Angola steering angle reduction learning;
72) Adding Buick Angkor turn angle reset learning;
73) Adding Buick Allure turn angle reset learning;
Cadillac
74) Adding Cadillac ATS steering angle reset learning;
75) Adding Cadillac SRX steering angle reset learning;
76) Adding Cadillac XTS steering angle reset learning;
77) Adding Cadillac CTS steering angle reduction learning;
78) Adding Cadillac ELR steering angle reset learning;
79) Adding Cadillac climbers ESV steering angle reset learning;
Chevrolet
80) Adding Chevrolet Aveo steering angle reset learning;
81) Adding Chevrolet Trax steering angle reset learning;
82) Adding Chevrolet Camaro steering angle reset learning;
83) Adding Chevrolet Cruze steering angle reset learning;
84) Adding Chevrolet Malibu steering angle reset learning;
85) Adding Chevrolet Volt steering angle reset learning;
86) Adding Chevrolet SPARK steering angle reset learning;
87) Adding Chevrolet Captiva steering angle reset learning;
Lancia
88) Adding Lancia DELTA (181) steering angle reset learning;
89) Adding Lancia LYBRA (Lee Bolang) steering angle reset learning;
90) Adding Lancia MUSA steering angle reset learning;
91) Adding Lancia PHEDRA steering angle reset learning;
92) Adding Lancia PHEDRA (180) steering angle reset learning;
93) Adding Lancia THESIS steering angle reduction learning;
94) Adding Lancia YPSILON (101) steering angle reset learning;
95) Adding Lancia YPSILON (402) steering angle reset learning;
Romeo
96) Adding Romeo 147 steering angle reset learning;
97) Adding Romeo 156 MY steering angle reset learning;
98) Adding Romeo 159 steering angle reset learning;
99) Adding Romeo 166 steering angle reset learning;
100) Adding Romeo BRERA steering angle reset learning;
101) Adding Romeo GIULIETTA (191) steering angle reset learning;
102) Adding Romeo GT steering angle reset learning;
103) Adding Romeo MITO steering angle reset learning;
Geely
104) Adding Geely GX7 steering angle reset learning;
105) Adding Geely GX9 steering angle reset learning;
106) Adding Geely NL4 steering angle reset learning;
107) Adding Geely SX7 steering angle reset learning;
JAC
108) Adding JAC S3 CTV models steering angle reset learning;
109) Adding JAC A30 steering angle reset learning;
Jaguar
110) Adding Jaguar F-TYPE steering angle reset learning;
111) Adding Jaguar XF steering angle reset learning;
Land Rover
112) Adding Discovery Discovery steering angle reset learning;
113) Adding Range Rover steering angle reset learning;
114) Adding Range Rover Sport Edition steering angle reset learning;
115) Adding Evoque steering angle reset learning;
116) Adding Freelander steering angle reset learning;
other:
117) Adding Dongfeng Nissan steering angle reset learning;
118) Adding Great Wall C20R steering angle reset learning;
RESETDPF function:
119) Adding Acura RESETDPF function;
120) Adding Audi RESETDPF function;
121) Adding BMW RESETDPF function;
122) Adding Chrysler RESETDPF function;
123) Adding Citroen RESETDPF function;
124) Adding Daewoo RESETDPF function;
125) Adding Fiat RESETDPF function;
126) Adding GM RESETDPF function;
127) Adding Honda RESETDPF function;
128) Adding HYUNDAI RESETDPF function;
129) Adding Nissan RESETDPF function;
130) Adding Infiniti RESETDPF function;
131) Adding Jaguar RESETDPF function;
132) Adding KIA RESETDPF function;
133) Adding Lancia RESETDPF function;
134) Adding Land Rover RESETDPF function;
135) Adding Toyota RESETDPF function;
136) Adding Scion RESETDPF function;
137) Adding Lexus RESETDPF function;
138) Adding Maserati RESETDPF function;
139) Adding Mazda RESETDPF function;
140) Adding Benz RESETDPF function;
141) Adding Mitsubishi RESETDPF function;
142) Adding MINI RESETDPF function;
143) Adding Opel RESETDPF function;
144) Adding Peugeot RESETDPF function;
145) Adding Porsche RESETDPF function;
146) Adding Romeo RESETDPF function;
147) Adding Seattle RESETDPF function;
148) Adding Skoda RESETDPF function;
149) Adding Subaru RESETDPF function;
150) Adding Vauxhall RESETDPF function;
151) Adding Volvo RESETDPF function;
152) Adding VW RESETDPF function;
Mileage adjustment:
153) Adding Geely Dili GL mileage adjustment system;
Optimal correction:
154) Optimized GM mileage adjustment system;
155) Optimized Chrysler, Toyota, Luxgen, GM, Baic and other models of IMMO remote control programming;

TDINTEL Vpecker Xtuner X500 Software Download Steps

TDINTEL Vpecker Xtuner X500 software download steps 
1: Download via computer, copy to phone or tablet to install.
Browse http://www.tdintel.com/
xtuner-x500-software-download
2. Click “Home” then “Support” at the bottom.
xtuner-x500-software-2
xtuner-x500-software-3
Copy it on the phone to install.
2. Use your phone to scan the QR code on the package box/ user manul or directly enter http://www.tdintel.com/
xtuner-x500-software-4
xtuner-x500-software-5xtuner-x500-software-6
Scroll down to select “Support”
xtuner-x500-software
Scroll down to select the device you want to download.
xtuner-x500-software-9
Download completed and then setup.

p.s

how-to-download-tdintel-vpecker-xtuner-x500-software.pdf

VCM IDS 3 V104.1 Newest Update for Ford Diagnostic Prorgamming Tool

If you are using the VCM IDS 3 V102.1, and the software quickloader displayed error “can not load the software”

vcm-ids3-quickloader-cannot-load-the-software

Please download and install the VCM IDS 3 newest update software V104.01 and Terminator software V3.4 as below, later you can use the new quickstart program to run the software.

VCM IDS 3 for Ford V104.01 software
https://mega.nz/#!aEwjTToQ!s6yfr_DbsdI5EJikNttOU1dzR5n_FwduRKO0YK4M3qc
Terminator Software V3.4 Download Link
https://mega.nz/#!mEoThD7a!Y88aZ0ON0QggUZacsD1dwOe4GWI7WTBZ5SsTGlF8fQw

Special Offer €89.00 for Renault CAN Clip Good Quality

Renault CAN Clip Renault Diagnostic Tool Multi-language Good Quality 

Special Offer: €89.00 DHL/YWEN Express Shipping

Renault CAN Clip Highlights:

Software Version: V163

Language: English,German, French, Italian, Spanish, Finnish, Swedish, Danish, Norwegian, Dutch, Romania, Portuguese.
Update Via CD

Diagnose, reporgramming, airbag test and other functions for Renault cars 1996 to 2013
Engine automatic gear shifting, Air conditioning system, SRS, ABS, ASR, MPL, GM, IMMO, Keyzess GO system, OBD-I I and so on.

renault-can-clip-diagnostic-interface

Price droped to €315EUR for JLR SDD2 Landrover Jaguar Diagnostic Tool

JLR SDD2 V146 Jaguar Landrover Diagnose Programming Tool

€315EUR with express shipping

1. Support Landrover and Jaguar Scantool Diagnostics,Vehicle Reprogramming and Immobilizer and Smart key.
2. Latest version V146, provide free activation code
3. No need PIN code for Land Rover key programming
4. Update via software / package sending online
5. Supports 29 multi-language: English, German, French, Finnish,  Spanish, Danmark, Czechic, Spanish , Slovenia, Vietnam, Turkey, Thailand, Swedish,
Russian, Portuguese, Greece, Poland, Norwegian, Holand, Korea, Japanese,  Italy, Indian, Hungary.
6. Supports Operation OS: Windows XP(SP2 or later),win 7, win 8 and win 10

jlr-sdd2-for-landrover-jaguar