[Update Notice] OBDSTAR X300 DP Update BMW FEM/BDC Key Programming for Free!!!

Original OBDSTAR X300 DP Pad Key Programmer Full Version with Bonus Diagnostic Function Supports Toyota G & H Chip All Keys Lost
obdstar-x300-dp-full-system-package-001
Free Update BMW FEM/BDC Key Programming
Function:
BMW FEM/BDC
1.Key Programming
●Key Information
●Key Programming Preprocessing
Step 1: Code data backup
Step 2: EEPROM Original Data Backup
Step3: Service Mode Data Generation
Step 4:Service Mode Writing
Step 5: FEM/BDC Module Programming
Step 6: EEPROM Original Data Recovering
Step 7: Code Data Recovering
●Key Adding
●Key Delecting
●Function Introduction
● Operation Guide
2. Other Function
● Key enable
● Key disable
● Key status
●Key frequency
●INS reading
●DTC reading
●DTC delecting
BMW FEM/BDC key Programming Supported list:
Series Chassis Year
1 F20/F21 2011-2017
2 F22/F23/F45/F46 2014-2017
3/GT F34/F35 2012-2017
4 F30/F31/F32/F33/F36 2014-2017
X5 F15 2014-2017
X6 F16 2014-2017
For more details, could find from our website:
http://www.cartool.co.uk/wholesale/obdstar-x300dp-diagnosis-programmer-key-master.html
Wish you enjoy a nice day! ^_^

How to choose an Autel TPMS diagnostic & service tool?

How to choose an Autel TPMS diagnostic & service tool?

Autel MaxiTPMS tools comparison, user instruction and frequently asked questions.

1.Autel MaxiTPMS TS401,TS408,TS501,TS508, TS601, TS608 and TPMS PAD comparison table.

autel-tpms-maxitpms-ts601-diagnostic-and-service-tool-pic

 

2. Read Autel MaxiTPMS frequently asked questions
1.TPMS parts related problems

2.Relearn procedure related problems

3.Tire pressure related problems

4.Sensor mounting related problems

5.Sensor ID related problems

6.Sensor frequency related problems

7.OBD issue related problems

8.Model year related problems

9.Indirect TPMS related problems

10.Software version related problems

11.What are high- and low-line TPMSs?

12.How to locate and solve TPMS troubles?

Autel tech support supplied by www.cartool.co.uk

 

How to assemble the case with VVDI BE key Pro improved version board?

This post shows the general guide on how to assemble VVDI BE Key Pro imrpoved version with the Smart Key Shell 3 Button for Mercedes Benz.

1. Put the VVDI BE key Pro improved version PCB into the case.

图片1

 

2. Cover the bottom case.

图片2

 

3. Insert the battery and cover the case.

图片3

4.Push the metal strips on both sides into the right position.

If the rear metal component is first assembled, then the metal strips on both sides won’t be able to pushed into the right position.

图片4

5. Here rearmetal button.

图片5

6. Put into the small key and start button.

图片6

If you want to disassemble the case, please do it from the last step to the first step.

图片7

Note: If the rear metal component is firstly assembled, then the metal strips on both sides won’t be able to put into the right position.

For more details, pls find from our website:

http://www.cartool.co.uk/wholesale/xhorse-vvdi-be-key-pro-improved-version-with-smart-key-shell-3-button.html

Have a nice day! ^_^