How to Program Key for Chevrolet Cruze with OBDSTAR X300 Por3?

One Cartool.co.uk engineer shares his testing on programming Chevrolet Cruze key under all keys lost situation by using OBDSTAR X300 Por3 Key Master key programmer.

Instruction:
Connect OBDSTAR X300 Pro3 key programmer with vehicle via OBD socket
Select vehicle brand:GM
Initializing
Select Immo/Remote
Select Immo/Remote
Select Chevrolet
Select Chevrolet
Select Cruze
Select Cruze
Select Without Smart
Select Without Smart
Select All keys lost
Select All keys lost
Please input security code
Please input security code and confirm
Turn ignition OFF for 5 seconds then Turn ignition ON
Configuring the system, please wait for about 10 minutes
Switch ignition off, remove key
Switch ignition off, remove key
Open and close the driver door and confirm all electronica close
Open and close the driver door

Turn ignition ON
The OBDSTAR Key Master will prompt whether to program next key
If yes press ENT button Turn ignition OFF, remove the key
Insert a new key, switch ignition on
Open and close the driver door and confirm all electronica close
Turn ignition ON
whether to program next key, press ENT to continue
Switch ignition off, remove key
Insert a new key, switch ignition on
Switch ignition off, remove key
Open and close the driver door and confirm all electronica close
Turn ignition ON
Again prompt to program next key, follow the system prompt until it is done.

Also you can check the models list and test more vehicles for a try.

Free download obdstar-x300-pro3-testable-car-models.zip

How to change the WiFi name to the series number of Vpecker Easydiag ?

WiFi Vpecker Easydiag is a wireless OBDII OBD2 diagnostic scanner with Battery configuration, ABS Bleeding, EPB, Oil Reset, TPMS, DPF reset special functions.

Now there are two versions of VPECKER on Cartool.co.uk, one is WIFI version(sp247), the other one is Vpecker Bluetooth version (sp247-b).

Here the technician will share how to change the WiFi name to the series number of Vpecker Easydiag ?

First, free download vpecker Wifi V6.2 Configuration Tool

http://www.vpecker.com/download/vpecker-wifi-upgrade-v6-2/

This tool can configure the name of your Vpecker wifi.

(If the name changed back the default name “HF-LPT120”)

Then, please follow the steps below:

Step1: Connect the WIFI “HF-LPT120” manually

Plug vpecker into vehicle, then make communication between vpecker scanner with laptop via WIFI. There is no need to enter password to connect wifi, just choose the vpecker easydiag wifi signal directly, the red light will turn to blue when finish the connection. Automatically identify vpecker and pecker version information when connection has wifi.

vpecker-easydiag-connection

(the RED light will turn to BLUE when connection success)

Step 2: Run the tool “Conf.exe”

Step 3: Click “Update” button and wait the data update successful

Step 4: Click “Wifi Conf” button

Step 5: Power OFF Vpecker and Power ON again

After that, the wifi name will change to the series number of Vpecker.

Vpecker Easydiag Scanner User Manual

http://www.cartool.co.uk/upload/info/vpecker-easydiag-v8.3-user-manual_2016091207005158.pdf

 

JLR SDD2 V146 Diagnose Tool Not Opened Error Solved

Some user of JLR SDD2 got “Device not opened” error when use it to do diagnose programming for Jaguar and Landrover models.

Online activation: Device not opened

jlr-sdd2-v146-not-opened-error

Click on Program, then this error pops up. Click on Close, and the Led light on JLR SDD2 scanner turns green

jlr-sdd2-v146-connection-display

Analysis from our technician:

Possibly it’s a driver issue.

Please check your JLR SDD V146 driver installation.

Usually the driver is automatically installed, after the Jaguar and Land Rover software installation success

So check the Computer Management:

Check COM port

(PC would select it automatically; COM number depends on different PC)

jlr-sdd-driver-com-port-setup-com4

VCM IDS 3 Ford Mazda OBD2 Diagnostic Tool 2016 Newest Update

Fly New Arrival Ford Mazda VCM IDS 3 OBD2 Diagnostic Scanner Tool
 
Highlights:
2016 Newest Update
VCM IDS Ford: V102.01A
VCM IDS Mazda: V100.00
No need install on virtual machine
Support WinXP SP2,Win7,Win8,Win10
Add More Newer Models than old IDS Vcm 2

ford-vcm-iii-ids3-diagnostic-tool

VCM IDS III functions include:

1. Scantool Diagnostics
2. Vehicle Reprogramming: reprogramming for all Ford vehicles ;reprogramming for all Mazda vehicles
3. Immobi and smart key
* All ford vehicles(Include all functions of original VCM/IDS);
* All mazda vehicles(Include all functions of original VCM/IDS)

IDS3 VCM supports 29 language:

1. Spanish
2. Slovenia
3. English
4. Greece
5. German
6. Danmark
7. Czechic
8. Chinese(Taiwan)
9. Chinese(China)
10. AmerEnglish
11. Vietnam
12. Turkey
13. Thailand
14. Swedish
15. Russian
16. Portuguese
17. Portuguese
18. Poland
19. Norwegian
20. Holand
21. Korea
22. Japanese
23. Italy
24. Indian
25. Hungary
26. French
27.French (Canada)
28. Finland
29. Spanish(Mexico)

New Arrival OBDSTAR SUZUKI PinCode Calculator F109

OBDSTAR SUZUKI PinCode Calculator F109 Add Immobiliser/Odometer Function
Language: English
Upgrade via TF card at any time
Software update Free update for 1 year
1. Support to calculate 20-4 digit PinCode cars.
2. Support to read 20-8 digit PinCode automatically.
3. Program Keys for most of SUZUKI.
4. Correct odometer for SUZUKI cars(not all).
5. No need to connect with computer, plug and play, automatic transfer.
6. No need to buy tokens.
7. One Key Upgrade
8. Have good man-machine interaction.
Functions Comparison on 3 Pincode Calculators for Suzuki cars
S/N Features & Functions F109 G-SCAN2 ZEDFULL
Five star is the top level
Picture
obdstar-suzuki-pincode-calculator-f109-001zedfullg-scan2
1 Portability ***** ** *
2 Body Weight 0.157kg 1.51kg 2.23kg
3 Specification(Length*Width*Height) 21*19*5(CM) 22*14*6(CM) 31*23*6(CM)
4 Token no need token no need token Approximately 30 tokens each time
5 Price ***** ** *
6 8 digit pin code ***** *****

Any interest you can Check OBDSTAR Suzuki F109 Pincode Calculator Support List

Newest Version TM100 V3.44 Transponder Key Programmer Update

TM100 Transponder Key Programmer Newest Update 
tm100-1TM100 V3.44 released:

(2016-9-20 )
1. Add keymaker for Chevrolet Aveo as MY2012. Parts: Immo, IC: 25160, Transponder: PCF7936;
2. Fix bugs;
Notes:
1.This version includes firmware 1 update. Please DO NOT disconnect PC with TM100 while updating;
TM100 V3.42 released:
(2016-9-14 )
1. Add function for odometer rewrite of CAS4,CAS4+;
2. Add function for BMW CAS3+ save ISN;
3. Add keymaker for BMW CAS3+ by ISN;
4. Fix bugs;
How to edit odometer for CAS4,CAS4+ ?
1.Selete Tools, Dump Editor, BMW, CAS4 odometer setting. Open dump file, current odometer value is displayed, input new odometer value, and set new value. Save new generated file and write it back to CAS4;
How to save ISN for BMW ?
1.Select keymaker for BMW CAS3+ adding key. After original key decoded, TM100 will save 16-byte ISN for you. If the same car lost all keys, you can use the saved ISN to do all key lost without reading ISN from DME;
Notes:
1.This version includes firmware 1 and 2 update. Please DO NOT disconnect PC with TM100 while updating;

How to connect Yanhua MB CAN Filter 18 in 1 ?

This M-Benz can filter should be added to car after odometer adjustment for most chasis model, EXCEPT for W222/W205/W447, those 3 chasis models should add canfilter before odometer adjustment.
S (W222) C (W205) V (W447)
S (W221) C (W204) E (W212)
E (W207) A (W176) G (W46)3
ML (W166) SL (R231) GL (X166)
B (W246) CLS (W218) SLK (R172)
SLS (W197) CLA (W117) GLK (X204)

yanhua-mb-can-filter-18-in-1-connect-manual-2

How to use Digiprog 3 Xprog do eeprom reading in Audi A4 cluster

One technician share testing guide on reading eeprom for Audi a4 2001, in order to copy the immo information from a cluster to another, and make the mileage follow with the immo information. If clone all eeprom content than the mileage is transferred too.

 

What tools can be used to work with Digiprog3 ?

Ecu programmers like Xprog, Carprog, UPA USB programmer

Original cluster:

The Jaeger cluster barely works

 

Note:

read the pin code from both the Instrument and adapt it to the vehicle

What to do on pin 21 and 22 on the chip?

– With car ECU programmers:

Eprom.set type,mcu,hc12,read,save.
eprom,set type,mcu,hc12,file,load,write.
Buy yourself Xprog-M programmer, Carprog full, UPA USB.
Pin 21 and 22 jumper after programming or wait 10 minutes.

– with Digiprog 3:

digiprog3-read-audi-mileage

Eprom,set type,mcu,hc12,read,save.
eprom,set type,mcu,hc12,file,load,write.

Reference:

Eeprom HC12 read and write to the other counter:

AUDI MM AB 8/2001 DIAGNOSIS / TACHO DIAGNOSIS

(Write down the exact ALWAYS old / incorrect Mileage)

The diagnostic port is in the driver’s footwell. Turn the ignition on a vehicle. Connect plug ST16 the diagnostic port and the DIGIPROG.

Select the program: cars / trucks – AUDI – MM 4 / 99- DIAG.

The DIGI PROG II shows you the old / incorrect Mileage.

Enter the new / correct Mileage and confirm this.

Should be then after programming on the speedometer 999999 KM give

The old / wrong KM value again so that the speedometer again the old / false indicates KM. Now you build the speedometer and break it to the see board. Solder the green and black wire to the same color marked

Arrows at. Now connect the blue and the green plug with the speedometer and plug ST41 with the DIGI PROG (picture on the following page.)

Now select the program: cars / trucks – AUDI – MM 4/99 HC12.

The DIGI PROG shows you the old / incorrect Mileage. Enter the new / correct Mileage and confirm this with the hook.

Now shows you the DigiProg II 5 min wait. Remove the connection between the DigiProg and the speedometer, wait 5 minutes and build the speedometer again. Alternatively, for 5 min. Wait, you can also like in the image on the next page shows the pins 21 and 22 bridges.

Here necessarily the board from any power supply (Digiprog3 v4.94, external power supply, etc.), Pin 21 + 22 bridge, and then you can use the tachometer.

Immediately reinstall.

Digiprog3 do KM Change on Mercedes W212

Customer Share:

I want to correct benz on my W212 2013 year. Is only way to use MB CAN Filter? I found some tutorial in carprog but doesn’t show steps with the mileage adjust. For example, if install mb can filter, do you still update ezs odometer value or just cluster? Yes I know AVDI Abrites original does it all, before you tell me, but can’t afford that software yet.

Anywhere else have to change it? Tire pressure sensors of transmission? Thank you in advance.

Customer solutions:

1.Late 2013 Mercedes W212 you need to correct odometer and install CAN Filter (EZS nothing).The can filter goes near the cluster. I have done with Yanhua Digimaster 3. It is not cheap. But I think at you can use digiprog 3. By the way, take backup from eeprom first.

2. If it is full color dashboard, digiprog 3 cant do it..

If it’s not facelift model (so before 2013) and use digiprog 3 v4.94, then you don’t need can filter/blocker.
But a can blocker is better to use all times, because if dealer reads the EZS it shows same mileage as in tacho, if you dont use can blocker then EZS shows 999999km.. (but normally dealers don’t read EZS, they only read ‘assyst manager’ when serviced).

To change mileage you need to use option ‘EZS’ in menu of mercedes w212 of digiprog III.. then it blocks ezs and changes tacho automatically.

If you roll back odometer to a lower mileage off last service, its best to delete service history in car. use option ‘assyst manager’. enter ‘744’ days and ‘25000’kms for next service warning, and press ‘V’ when it asks to delete service history.

When you have a diesel it probably gives DPF error in car. and the car will run in emergency-mode, only drives max 80kmh. digiprog can’t reset this. You have to go to dealer or someone else who can reset dpf.

When some other errors turn up in display use the ‘clr error’ option to reset.

Autel Maxisys Pro MS908P support ECU Reflashing on BMW 750Li

Here is the user instruction shared by Cartool.co.uk on how to do ECU programming with Autel Maxisys Pro MS908P tablet and J2534 ECU programming device.

Note: so far, Autel MS908P is the only full diagnostic scanner supporting online ECU programming.

Model: BMW 750Li 2006

All operation (ready) for ecu programming:

Part 1 – connection issues

Step 1 – connection to voltage supply

Connect the car to a stable voltage supply

Make sure the battery clamps are properly fixed

Fully charge Autel MS908P tablet

Step 2 – connection to network

Connect Maxisys pro to the Internet

Make sure the network connection is stable to ensure a successful ECU programming

Both wired & wireless connection is ok, using ethernet cable

Check the connection status icon to confirm the internet connection is successful

Step 3 – connection to J2534 ecu programmer

Connect Maxiflash J2534 ECU programming device to MS908P using USB cable

Tighten the screws

Step 4 – connection to the car

Connect Maxisys pro to the vehicle with OBDii cable

Now, all connection complete

Part 2 – ECU programming

Here goes the ECU programming on BMW.

Select Diagnostics n the main menu of Maxisys pro MS908P

Select BMW

Turn ignition off…wait 10 seconds…turn ignition on

Tap OK and read out vehicle data

Tap CIP (coding, individualizing and programming) for ecu programming

Vehicle configuration

Read data and tap ok to go on. Edit button is available to perform customized SA configuration

Make sure and delete vehicle data correctly

Tap ok

Upon completion, tap ESC to exit

Tap yes to save revised data

Maxisys is communicating with control units for a few minutes

Confirm whether any control unit has been replaced or not before programming

Tap yes or no accordingly to continue

Select SIM for coding/programming

Tap Selective update to reprogram a specific control module separately

Or perform Complete update by selecting all modules

Here, program SIM only

Tap OK for vehicle info

Tap Execute measures plan to continue

Turn off ignition

Switch on terminal 15 (ignition)

Again, make sure of the stable network connection, and other connections to start reflashing

Coded! Stored DTCs will be cleared

Turn off ignition and remove the key with remote control from key slot (if provided).

Wait 10 seconds.

Insert the key with remote control and turn on ignition

Then go on the next action. All action will be done one by one automatically

Do not perform other tasks at the same time

The system will generate a report after reflashing

Tips:

Autel MaxiSYS Pro MS908P Diagnostic WiFi Diagnose Reprogramming Operation Video
how-to-update-maxisys-ms905-ms908-ms908p
how to use autel-vci-wireless-bluetooth-interfacevci-for-maxisys-tool

Vpecker Easydiag Bluetooth Connection Guide Manual

The VPECKER Easydiag Bluetooth manual connection way is more efficient and stable. This guide will help you to connect the Bluetooth easily.

WINDOWS XP
Step 1: Make sure there is an icon of the Bluetooth in the taskbar on the right side of the bottom of the screen.
Step 2: Adding Bluetooth device to the computer: click the icon of the Bluetooth, it will show the interface like the following picture 1, then click “Add a Bluetooth Device”.
vpecker-bluetooth-connection-manual-1
Tick “My device is set up and ready to be found” on the interface of Picture2. Click Next.
vpecker-bluetooth-connection-manual-2
Picture 2
Step 3: To choose the TDINTEL VPECKER in the searching interface as the following Picture 2 shows to pair with the Bluetooth. Here the name of the VPECKER is VB16078388,please click “Next” to pair.
 vpecker-bluetooth-connection-manual-3
Picture 3
Step 4: Now we need to input the pairing code manually. Selecting the second subject
“Use the passkey found in the documentation”, and input the default code “1234”,
click Next to pair.
 vpecker-bluetooth-connection-manual-4
Picture 4
Step 5: We need to stop here for a minute on the account of the configuration of the computer, as Picture 5 shows.
vpecker-bluetooth-connection-manual-5
Picture 5
If it shows the interface as the following picture 6, it means the Bluetooth device has been added the computer. Then please close this page.
vpecker-bluetooth-connection-manual-6
Picture 6
If the Bluetooth has been added before, and you want to add it again, please delete it first. The steps are as follows:
1. Click the right bottom Bluetooth icon, select “Show Bluetooth Devices”.
 vpecker-bluetooth-connection-manual-7
Picture 7
2. Enter into the interface as Picture 8 shows, click the Bluetooth to be deleted, and then click the Remove button, waiting to finish.
 vpecker-bluetooth-connection-manual-8
Picture 8
WINDOWS 7
Step 1: Make sure there is an icon of the Bluetooth in the taskbar on the right side of the bottom of the screen.
Step 2: Adding Bluetooth device to the computer: click the icon of the Bluetooth, it will show the interface like the following picture 1, then click “Add a Bluetooth Device”.
 vpecker-bluetooth-connection-manual-win7-1
Picture 1
Step 3: To choose the TDINTEL VPECKER (like VB********) in the searching Interface as the following Picture 2 shows to pair with the Bluetooth.
 vpecker-bluetooth-connection-manual-win7-2
Step 4: Now we need to input the pairing code manually. Click the second subject “Enter the device’s pairing code” on picture 3.
 vpecker-bluetooth-connection-manual-win7-3
Step 5: Input the default pairing code “1234”, click “Next” to pair.
 vpecker-bluetooth-connection-manual-win7-4
Step 6: We need to stop here for a minute on the account of the configuration of the computer. If it shows the interface as the following picture5, it means the Bluetooth device has been added the computer. Then please close this page.
 vpecker-bluetooth-connection-manual-win7-5
If the bluetooth has been added before, and you want to add it again, please delete it first. The steps are as follows:
1. Click right botton Bluetooth icon, select “Show Bluetooth Devices”.
 vpecker-bluetooth-connection-manual-win7-6
2. Enter into the interface as Picture 7 shows, click the Bluetooth to be deleted, click the righ button of the mouse to choose or click “Remove device” to delete.
vpecker-bluetooth-connection-manual-win7-7

Windows 8/10
Step 1: Make sure there is an icon of the Bluetooth in the taskbar on the right side of the bottom of the screen.
Step 2: Adding Bluetooth device to the computer: click the icon of the Bluetooth, it will show the interface like the following picture 1, then click “Add a Bluetooth Device”.
vpecker-bluetooth-connection-manual-win8-win10-1
Step 3: To choose the TDINTEL VPECKER (like VB********) in the searching interface as the following Picture 2 shows to pair with the Bluetooth.
vpecker-bluetooth-connection-manual-win8-win10-2
Step 4: Now we need to input the pairing code manually.
vpecker-bluetooth-connection-manual-win8-win10-3
Step 5: Input the default pairing code “1234”, click “Next” to pair.
vpecker-bluetooth-connection-manual-win8-win10-4
Step 6: We need to stop here for a minute on the account of the configuration of the computer. If it shows the interface as the following picture 5, it means the Bluetooth device has been added the computer. Then please close this page.
vpecker-bluetooth-connection-manual-win8-win10-5
If the Bluetooth has been added before, and you want to add it again, please delete it first. The steps are as follows:
1. Click the right bottom Bluetooth icon, select “Show Bluetooth Devices”.
vpecker-bluetooth-connection-manual-win8-win10-6
2. Enter into the interface as Picture 8 shows, click the Bluetooth to be deleted, and then click the Remove button, waiting to finish.
vpecker-bluetooth-connection-manual-win8-win10-7
Free Download Vpecker Easydiag Bluetooth Connection Guide Manual
http://www.cartool.co.uk/upload/info/vpecker-easydiag-bluetooth-connection-manual_2016091207005157.pdf

OBDStar Tools One Key Update Guide Manual

OBDStar Tools One Key Update ManualStep 1: Remove the TF card from your device.

Insert your TF card into computer.
Format your TF card and ensure it is empty.
Step 2: Login our website,and click “One Key upgrade”
 obdstar-one-key-update-1
Step3: Download and install the “One Key upgrade”. You will see this software.
obdstar-one-key-update-2
Step4: Open the “one key upgrade”. Input your username and password. Then select “End User” and click “Log in”.
 obdstar-one-key-update-3
Step5: Input your S/N.
obdstar-one-key-update-4
Step6: Select all and click “Upgrade”.
obdstar-one-key-update-5
Step7: Upgrade is completed.
obdstar-one-key-update-6
Step8: Open your TF card. You will see these files.
obdstar-one-key-update-7
 obdstar-one-key-update-8
Step9: Remove the TF card from the computer. Insert your TF card into the device.
obdstar-one-key-update-9
Update succeeds!
Thanks!
Free Download OBDStar Programmer Tools One Key Upgrade Guide
http://www.cartool.co.uk/upload/info/obdstar-product-one-key-upgrade-guide_2016091207193808.pdf

Launch X431 V and X-431 V+ Update Manual

Launch x431 V (x-431 pro) and launch X-431 V+ (x431 pro3) work combine with mobile internet can share maintenance data and case library, and build public and private maintenance social circle,etc., thus lead to wide car diagnostic community. Launch x431 V / V+ is a typical diagnostic device contributed by Launch to diagnostic industry concerning internet application.

Here let’s check the instruction to update the x 431 V / x-431 V+ diagnostic scanner.

1) Click red box marked “1” above. Press on X431 V+ icon and push it up to the trash bin

2) Click “Settings” >> select Manage Apps>> X431 V+ >>Uninstall

3) Browse Launch website www.dbscar.com.

Click Category Product, select Launch V or V+.

Click “Download for Android” below X431 V image to start download client.

Downloading, please wait patiently, file about 19MB.

Double click X431_V.apk

Click “Installation Package” after complete download.

Click “Install”

Click “OK” when the system prompts to update

Click “Cancel”, because I haven’t login.

4) Login with your CC number and password

Read Claim, click “Read”

Select Bluetooth Serial Number

5)Click “Download”, this is old software version.

Select the vehicles you want to download.

Note: the software downloaded from official site is the newest version

Click “following”

Click “Download”

After complete download, no vehicle software found, since its old version, exit the DBScar site, and login again to update.

7) Login www.dbscar.com, open X431 V, it prompts to update, click OK

Do not click Cancel, let it download program automatically, it will take less than 20minutes.

Click “Installation Package” after complete download.

Click “OK” to replace old application and the former information will be saved

Click “Install”

After complete download, the car models will display

Note: better not click “One Key Update” to update

Click “Association” to pair Bluetooth

Launch X431 V X-431 Pro Register Guide

Launch X431 V is the newest replacement of X431 IV , X431 Diagun 3 and X431 PRO. X-431 V Full System Diagnostic Scanner is available for some 12V diesel car. X-431 V supports wifi/Bluetooth and can be update online. Launch X-431 V supports up to 69 car brands and whole system of cars , and also allows to print out data via Launch wifi printer.

How to register Launch X-431 V (X431 Pro)  ?

To diagnose a vehicle using X-431 V, follow the steps to proceed:

x431-v-register-1

( Free download http://www.cartool.co.uk/upload/service/launch-x431-v-user-manual.pdf )

1. Register to be User of Launch X431 Scanner

x431-v-register-2

2. Activate Connector

x431-v-register-3

3. Download Software from Official Launch Server

x431-v-register-4

4. Start Diagnosing with X431 V Scanner

Kess V2 Ksuite FW V4.036 Connection Error Fixed

How to fix KESS V2 master firmware v4.036 communication /connection issues ?

If all installation process of Kess v2 are ok, while the computer cannot recognize kessv2, and come out the error message in Kess v2 firmware v4.036 Ksuite v2.22 displayed that:

connection not established

kess-v2-connection-error-1

The Solution is:

I took this UL46 USB protection chip off my old Ktag board.

kess-v2-ul46-usb-protection-chip

this is the UL46 USB protection chip

(if you don’t have this chip, go to the kess v2 vendor for it)

Then Kess v2 v4.036 is detected on usb :) Everything is ok so far.

kess-v2-usb-driver-detected

How to Setup JLR SDD Software Engineering Mode?

Here is the instruction on setting up JLR SDD software from normal mode to engineer mode.

Optional device running SDD engineering version:

V146 JLR SDD2 for Landrover/Jaguar diagnosis and programming tool (the only JLR device with engineering mode currently, tested ok, safe)

Let’s check the activate process for JLR SDD Software Engineering mode.

1 click on the golden key icon marked arrow picture below

jlr-sdd-engineering-mode-setup-1

2 find out the Seed

3.Calculate engineering password with JLR SDD Coded Access Password Calculator according to the Seed (see two pics BELOW)

jlr-sdd-engineering-mode-setup-2

jlr-sdd-engineering-mode-setup-3

Then click on Activate to get fully activated

4 the bottom status bar on the SDD interface turns yellow

jlr-sdd-engineering-mode-setup-4

5 SDD engineering mode is activated and ready for use

jlr-sdd-engineering-mode-setup-5

Options available for engineering mode password calculator:
Land Rover/Range Rover:

CCF Editor
Taiwan Vehicle Update
Software Download
L316/L322 Odometer
L322 Recover Keys
L322 Erase Keys
Option 8
Jaguar

VIN Bypass
VID Block Eitor
CCF Editor
Software download
X150/X250/X351 Odometer
X351 Recover Keys

fly-obd-terminator-fvdi2-calculate-pin-code-10 fly-obd-terminator-fvdi2-calculate-pin-code-11

How to Use Vxdiag Diagnostic Cloud APP?

VXDIAG NANO Diagnostic Cloud APP is Available to use Online Now

VXDIAG Diagnostic tools diagnose cloud app work with Win7 / Win10 system, but Winxp.

Here is free download link for Vxdiag (diagnostic cloud app) VCX SDK Driver  

https://mega.nz/#!esxVxIzb!h3CJbcyNG0u1OE_Tam978pygzfuKktQMrRCDcM9E0H8

How to use the VxdiagCloud to diagnose on your vehicle ?

how-to-use-vxdiag-diagnostic-cloud-app-1

how-to-use-vxdiag-diagnostic-cloud-app-2 how-to-use-vxdiag-diagnostic-cloud-app-3  how-to-use-vxdiag-diagnostic-cloud-app-5

You can login in the testing account with the information below
Login ID: **nnuo** Password: **nnuo**

(Pls contact us if you own Vxdiag diagnostic scan tools from our company)

how-to-use-vxdiag-diagnostic-cloud-app-6 how-to-use-vxdiag-diagnostic-cloud-app-7 how-to-use-vxdiag-diagnostic-cloud-app-8