BMW Rolls-Royce Diagnose Easycoding V1.4.0.151112 Update Online


BMW Easycoding supports BMW and Rolls-Royce vehicle from 2010-2014 year. Easycoding is specialize in vehicle parameter setting up and diagnose at the same time for BMW and Rolls-Royce.  Easycoding includes a usb dongle, and you do not have to install any driver on your computer, software easy installation and use.  Easycoding  for BMW diagnostic supports “recovery” function if you change some parameter not suitable for your vehicle,  very safe.

easycoding-software-sp222-1 easycoding-software-sp222-2 easycoding-software-sp222-8
































BMW Easycoding  supported multi-language:

English, Russian, German, French, Spanish, Japanese, Italian, Korean, Dutch, Polish, Thai, Turkish, Czech, Portuguese, Indonesian, Swedish, Greek

BMW Easycoding Update online

Username: EasyCoding


Easycoding V1.4.0.151112 Version New Update Features:

1. Online Upgrading Module is added.
2. VIN database of BMW is renewed to October of 2015.
3. VO modification function is added .
4. Single system CODING function is added which makes CODING available on new or used ECUs.
5. DEMO function is added.

free download easycoding-user-manual 

How to do Benz SBC Reset with MB SD Connect 4?,uk Customer Share on Benz SBC Error Repair Steps with MB SD C4 (sp100-d) plus SD C4 Software Platinum Edition (ss160-1) .

How to use SBC Reset function with SD C4 Software Platinum Edition ?











It started like most of them…….
As a request !!
So,it was a combination , of a faulty SBC ,common sence , LOTS of time and GUTS to figure this out

Make sure engine is running !!!

In Developer mode you need to go to Entwickelingsdaten – > ansteueringen -> Gesamstliste aller Ansteuerungen

to see how many times brake has been pressed there is a line that says: Bremsenzahler (DJ_GetBrLive) or DJ_GetBrLiveTime

then 1 line down there you see Bremsenzahler aktualisieren und Lebensdauerzahler F neu berechenen -> click it !
Parameter uINBR = 0
then click F3

1 line down Bremsenzahler auf beliebigen Wert setzen (DJ_SetNBr) -> click it
Parameter uINBR = 0
then click F3

Then scroll down untill you see the line’s :

Lebensdauerzahler F neu berechenen (DJ_CalcLiveTime)
Parameter uINBR = 0
then click F3

Lebensdauerzahler F neu berechenen und schreiben (DJ_BuildAndWriteF)
Parameter uINBR = 0
then click F3

Log out of SBC !!
log out of verhicle !!

let engine run at least 10 minutes or drive at least 10 minutes

If no coils are damaged , SBC fault code is not AKTUEL nomore
(Dj_setNBr) Here you SET new brake counter value back to 0
(Dj_setNBr) uINBR = 0

Resetting break counter to zero is in my opinion , not messing with …..

Each time SBC powers up it checks itself time after time

If there occures any problem in SBC unit with valve,brushes or whatever , it will go into error anyway. that you will NOT be able to erase in Dev mode

If you switch on contact of Brand new MB with SBC and press break 300.000 times it will go into this so called “error” you wanna say SBC is broken then ? without driving a milimeter ?

No it’s indication to have SBC unit checked by MB workshop $$

Yes it’s true that MB has to replace Faulty SBC units for free since Factory will pay all there labor & material.
But most Dealers try to have costumer pay for this procedure claiming costumers car has no a Dealer serviced History.

Best Mercedes Benz Star Software HDD for MB SD C4

Check Performance Testing on D630 Laptop with SSD & Ordinary Internal HDD,  and choose the best Mercedes Benz Star software hdd for your MB SD C4 (SP100-D).

MB SD C4 Software HDD installed on D630 Laptop 4GB (SO106-B)

/ Time Consuming 

Poweron –

Enter the System

Shutdown Xentry Diagnose
SSD 90s 20s 145s
Ordinary Internal HDD 240s 50s 207s
MB SD C4 Software HDD installed on D630 Laptop 1GB (SO106)

/ Time Consuming 

Poweron –

Enter the System

Shutdown Xentry Diagnose
SSD 193s 22s 268s
Ordinary Internal HDD 300s 120s 307s
Carsets, also provides several Mercedes Benz mb sd c4 full combination set ready to use with our customers who can pick up the goods and use them directly.
MB SD Connect Compact 4 Plus Dell D630 Laptop 4GB with software install ready
PP02 (€649.00) = SP100-D+SO106-B+SS175+SS162-D9
MB SD Connect Compact 4 with Vediamo Plus D630 Laptop 1GB Software Install Well
PP01 (€615.00) = SP100-D+SO106+SS175+SS162-D9+SS136
MB SD Connect Compact 4 Star Diagnosis with Vediamo Plus Dell D630 Laptop 4GB Support Offline Programming
CS100-D2(€605.00) = SP100-D+SO106-B+SS175+SS95-D+SS12+SS136
2015.9 mb sd c4 software hdd SS162-D9;
2012.11 mb sd c4 software hdd SS95-D;
Setting up offline mode In DAS SS12;
Vediamo V5.00.05 without manual SS136;
One Software Pre-installed and Tested One Time Service SS175.
MB SD Connect Compact 4 Star Diagnosis Plus Dell D630 Laptop 4GB Memory Support Offline Programming

Fgtech Galletto Test Functions/Models Success and Fail list

Latest V54 FGTech Galletto 4-Master BDM-OBD PCB Board Display

Latest V54 FGTech Galletto 4-Master BDM-TriCore-OBD PCB Board Display

Fgtech Galletto Test Functions/Models Success and Fail list:

EDC16u34 (VAG) Read/Write ok (OBD)
EDC16U1 (VAG) Read/Write ok (OBD)
MED9.1 (VAG) Read/Write ok (ODB)
Trionic8 (saab 9-3) READ/WRITE OK (OBD)
EDC16P (VAG) Read/Write ok (OBD)
EDC15V (VAG) Read/Write ok (OBD)
EDC17CP14 03L906022G Read/Write ok (OBD and boot mode)
EECV 1.8tddi read/write ok

AUDI ME 7.1.1 3.0 v6 read ok – awaiting flash

fiat multijet
mjd 6f3 diesel read/write all ok

renualt megane
siemens s3000 read hitachi mcu/write ok

EDC15C13 (Renault) Read/Write ok (K-line on bench and boot mode)

DDCR (Nissan Almera 1.5DCI) OBD read/write OK

Mercedes w211 2.2 cdi edc16c3 obd, ecu data ok read/write fail! Bdm read ok

edc16c39 obd r/w ok
edc16c39 bdm r/w ok
edc16c9 bdm r/w ok
astra J 2009 denso galletto jtag NOT ok (but ktag r/w same ecu ok with jtag)

mitsubishi grandis
edc16u31 obd r/w ok

renault megane /laguna
sagem3000 obd r/w ok

bmw 3/5/7 series
edc16c31/35 obd r/w ok
edc17 in boot mode ok

edc16c34 obd r/w ok
dcm 3.4 obd r/w ok

edc16c34 and delphi ECUs obd r/w ok

edc15 / my galletto can not read program shout down (I use kess)
edc16 obd r/w generally ok
edc17 in boot mode ok

edc17 boot mode ok

Audi S3 Med9.1 r/w (OBD) ok
Mercedes GLK Delphi CRD2 r/w (OBD) ok
Peugeot 207 EDC16C34 r/w (OBD) ok

Merc w212 crd 3.7 obd. OK
BMW E87 116D 2.0 EDC17C06 Bootmode r/w ok
BMW E83 3.0d ODB r/w ok
ME 7.5 (VW 1.8T AWT) Read ok / Write ok (OBD)
Merc Viano EDC16 C2. OBD. Ok
VW Golf5 1.4 TSi
ecu MED17.5.1 Boot mode r/w ok
I test clone work ok
sirius32N,EMS3132,EMS3134 in boot-mode read/write OK.

Custom Share:  Read Siemens sirius 32 with Fgtech galletto on boot mode flash

Mazda 5 2.0D 2005 Denso RF7K read/write OBD ok
Mazda 6 2.0D 2006 Denso RF8J read/write OBD ok

Peugeot 308 1.6 HDI 2013 Siemens SID807 EVO read/write BOOT ok

BMW X6 3.0D 2012 and 2013 (306 and 245hp)BOSCH EDC17CP45 read/write BOOT ok

Mistubichi Pajero 3.2DID 2013 Denso 4M41 and 4D56 read/write JTAG RENESAS ok
Mercedes W203 320CDI EDC16cp31 r/w ok (OBD)

Audi q7 3.0TDI – ok
BMW e46 2.0D 150km EDC16c31- ok
BMW E90 2.0D 163km EDC16c35- ok
Chevrolet Captiva 2.0D 150km – ok
Renault Trafic 2.5D EDC15 – ok
Mercedes B180CDI EDC15c32 – ok
Mercedes B200CDI – ok
VW Golf4 102km – edc15 – ok
Skoda Octavia 1,9TDI 105km EDC16 – ok
Citroen Jumpy 2.0D Simens 802A – ok
Ford Focus 2.0D 136 PSA Simens 802 – ok
Mini One 1.6 90km – ok

Mercedes B180&B200 CDI – ok
Q7 3.0tdi – ok
BMW one – ok
Landrover /jaguar EDC17CP11 read out in boot mode ok

BMW 330d EDC15C4 read ok/write ok via OBD
Mercedes vito 111 EDC16C31 read ok/write ok via OBD
Mercedes vito 120 EDC16C31 read ok/write ok via OBD
bmw e90 edc 17cp reading ok write fail. boot mode ok!
vag edc17cp14 read/write in boot mode ok, read in OBD ok
vag pcr2.1 read/write OBD ok, PCR2.1 unlock via bootmode ok
vag edc16cp34 obd read/write ok
fiat/iveco edc16c39 obd read/write ok
edc16u31/34 obd read/write ok, BDM read/write ok
Mercedes Vito 2.2CDI 2012 Delphi CRD2.x (OBD) read / write ok

Siemens BMW MSS54 BDM R/W OK OBD not tested (will probably work)
If you change ST chips to another EEPROM works fine wit HP unit

· edc15c7
· ME 7.3.1
· edc16c39
· edc16c39 read time 40 MINUT!
· id Alfa 147 immo off (k line /boot mode)

· edc16c31 obd
· BMW X5 2007 3.0TDI
· BMW 525 (E39)
· BMW 320D E46
· bmw e90

· Grande Punto read 1_3 MJT 75 hp

· EDC15C5
· edc5c2
· delphi CRD2

· EDC16c9
· Opel Corsa-D CAN

· edc15c7 boot mode (ID problems)
· EDC 16C34
· EDC16c3 K line
· edc16c34

· Renault Delphi 2007 k-line

· edc15v
· EDC15-P
· edc15
· Golf Plus 2006 2.0TDI
· EDC16U34
· A4 2.0 tdi 2008
· Skoda octavia vrs 2005
· VW crafter READ
· VW Golf5 1.9TDI
· Audi A6 V8 4.2l Petrol (over OBD fuse for dash fuse 11 or 15 , but it worked after pulling the fuse for dash and it went 100%)
· med9.1
· edc17cp14
· EDC17
· But edc17cp20, edc17cp44, etc, etc same year, have tricore protected active, and if you write in obd, ecu bloqued.

BMW E70 3.0D EDC16 (BDM)
bmw. edc16c35 (BDM)
Opel EDC16c9 (BDM)
iveco edc16 BDM (BDM)


Fgtech Galletto V54 What not work:
i have FG Tech v54, with one cannot read Subaru Impreza 2.0d, with another one read/write ok, Denso ECU.


What is the difference between VCM II Ford diagnostic tools?


Ford VCM II diagnostic tools series comparison list:

Best Quality Ford VCM II diagnostic tool newest version V97 is most powerful professional scan tool supports diagnose and programmer for Ford till 2013 year.











VCX NANO Ford/Mazda 2 in 1 VXDIAG Diagnostic Tool for Ford IDS V97 and Mazda IDS V95 supports both Ford and Mazda vehicles from 1996 to latest 2015.

Vxdiag VCX Nano VCM IDS 2-IN-1










Item number SP177 SP177-1 SP177-C SP177-C1 SP177-C2 SP239-B
Software V96 V97 V97 V97 V97 V97
Software Ford Ford Ford Ford Ford Ford and Mazda
Quality Ordinary B A A B Ordinary
SP239-B has the difference working method as others. Quality A has the best quality. For Ford VCM II which do not have WIFI adapter, if you need WIFI function, you need to buy the WIFI D-link Wireless card.

Please pay attention to install Vxdiag IDS V97 software:

1) After you install software till V96 ready. Backup your software first. Then install this V97 software. IDS V97.01 Free Download
2) You need to install the above new driver for V97 software. Vxdiag IDS V97.01 Free Download


How to set WIFI connection of Wireless Ford VCM2

Best Quality Ford VCM II wireless version with newest software  V97 supports communicate with your computer with WIFI D-Link Card.  Ford VCM II support diagnose and programmer for Ford till 2013 year,  it is most powerful professional scan tool for Ford till now.
Note: Computer requirement for wireless VCM2:  Works on Windows XP & 7 Only.

How to connect the ford vcm2 with wifi?

Configuring Wifi ford vcm ii oftware
Wireless Vcm ii clone connection
Connection to VCM II should only be handled through the Device Selection Tab Figure
Do not use the PC’s internal wireless connection (shown below) to connect to the VCM II Wireless Adapter.

Note: Before configuring Ford VCM II clone wirelessly, the VCM II must be configured with a wired connection. See the Configuring IDS And VCM II for the first time section in the IDS VCM II Quick Start Guide for details.

Tips above are mainly for the following types of VCM2 device:

SP177-C (+SP177-S extra pay for wireless adapters),
SP177-1 (+SP177-S extra pay for wireless adapters),
SP177-C2 ,

Note: here we high advise you to get SP177-C1 /SP177-C2 with wireless adapters.














D-Link Adapter for wifi ford VCM II

With wireless adapter, you can connect your laptop and Ford VCM II Device by wifi as long as your Ford VCM II hardware support wireless networks.
The wireless adapter set one pair contain two pcs, one for Ford VCM II main unit and one for your laptop.


Engineer’s Share on V17.1 Porsche PIWS2 Tester software update manual

Newest V17.1 PIWS2 tester II YANHUA Porsche diagnostic scan tool can work with latest Macan.

Language: English, German, French, Italian, Spanish, Japanese, Chinese, Russian, Portuguese and Dutch.
Operating system: Windows XP only (Panasonic CF-30 laptop CPU: 9300 4GB RAM)

How to update Porsche PIWS from V15.6 to V17.1 ?

1) Please insert the upgrade DVD into DVD rom, then choose [Tools- DVD Upgrade] the software will install automatically.
2) Click [Yes] to confirm released DVD installation prompt;
3) Click [OK] to confirm the setup.
4) When you seen these screens, you need wait with patient, it might cost around 4-7 hours to finish the whole upgrade process.
5) Open the software after computer reboot, check the Porsche Tester2 PIWS2 V17.1 software information.




How to Use Xtool X-100 PAD Key Programmer

X-100 PAD is a tablet with the latest technologies to perform key programming, mileage adjustment, oil service light reset, timing belt service light reset, tire pressure warning light reset , EPB reset, throttle body reset, DPF reset, battery reset, steering angle calibration and OBD-II engine diagnosis. X-100 PAD key programmer provides super-fast solution and work as generic workshop level diagnostic equipment.

X-100 PAD Language: English only (It will add Deutsch and Português in the future.)

X-100 PAD Main Features:


1) 100% genuine scanner, Xtool company made. High quality.

2) Support one button click to update the tool by WIFI or cable.
PAD has WIFI function, you can directly update the software via PAD by WIFI connection.

If you do not have WIFI, you can use lan cable to connect the internet for update.
Update is very easily.
When new software release, you will see the new software on update option.
Just click the “update” button for the software and wait for the finish.
Then you will update your tool to latest.

3) With EEPROM ADAPTER, no need to buy alone.

4) X300 Plus updated version. New adds more SPECIAL functions.

5) Free Download xtool-x100-pad-user-manual.pdf


How to Use the X-100 PAD Key Programmer?

1. X-100 PAD Activation

1) Connect the PAD with internet by WIFI

2) Enter the following information, after done, click activate. Then PAD is activated and can be used to work on vehicles.














For activation code and serial number, you can find the information on about function of the PAD when you power on the PAD.
For nickname you can use any name you want.
For login account, please use your valid email address or phone number. Better will not forget it in the future.
For password, you can setup any number you like. They system will save it after done. Activation is a one time process. The diagnostic application will start after activation.

After you finish activation, when new software release in future, you can directly update your tool via WIFI.

How to purchase Xhorse VVDI2 with VVDI

If you owned a Xhorse VVDI VAG Vehicle Diagnostic Interface SV30 , now you are allowed to update your VVDI1 to VVDI2 Commander Key Programmer.

Then How to purchase Xhorse VVDI2 with VVDI?










1. If you need update VVDI/BMT to VVDI II, you need to send VVDI main unit & all cables/connectors include device serial number to us, then pay the update cost (not including shipping) to update the device.
Note: If you do not send back the full VVDI package, you need to pay extra cost for accessories.

2. After we received your update cost, we will send you VVDI2 full system Trial Version with 20Days.
And you can login in Xhorse official website to register the device and use full functions of this VVDI2 you received.
VVDI2 Full System SV86 = VVDI2 Basic function + BMW Multi Tool+ Porsche+ VVDI Immo 5th + BMW OBD function + CAS4

3. On the next day morning after 20Days free trail, you need to confirm with us the VVDI2 functions/authorizations you need, then pay us the corresponding price. Then the factory will authorize your device officially, and which can be irrevocable.

If you do not need full authorization, you can choose the following based on your needs.
Item number of VVDI2 Series SV86 SV86-B SV86-C
Price 2369USD/2134EUR 1550USD/1409EUR 499USD/453.6EUR
Basic function
VW ×
Porsche × ×
5th AUDI authorization +320USD (SV86-2)
BMW OBD authorization +720USD (SV86-3) +720USD (SV86-3)
BMW CAS4+ Authorization +260USD (SV86-4) +260USD (SV86-4)
√ means this authorization is coverd. + 320USD means this authorization is not opened. If you need this authorization, you need to pay extra 320USD to open.

Customer Share on Kess V2 & Ktag

Customer Feedback on Kess V2 & Ktag

KESS V2 is a ECU programming tool that is perfect for OBD use, while KTag is perfect for Jtag, BDM and all the Boot application (tricore and ST10).

With KESS V2 you programming directly through the OBD port of the vehicle, while with Ktag (Ktag 2.15) you need to take apart the ECU and open it, after you can make the read/write operation.

Many ECU has the advantage that can be read and write from OBD port (so KESS V2 is perfect), but there are lot ECU that need to disassemble from the car and open and this is the case for all the ECU that need to be programmed with Jtag, BDM and Boot protocols, so KTAG is needed.

Newest Update V3.9.2 VVDI Prog Super Programmer

VVDI Prog Super Programmer

Newest Software Version V3.9.2
Newest Hardware Version: V1.2.2
Include free BMW ISN read function and NEC, MPC, Infineon etc chip continously update service.

What’s new in VVDI PROG v3.9.2 (2015-10-30):

* the firmware update is unnecessary
+ add CAS2 version 2 wiring diagram
+ add PCF79XX wiring diagram
+ In <2- microcontroller> Motorola, add
   MC9S12XES384 with mask model:
  (2M25J, 3M25J, 0M12S, 1M12S),
   MC9S12XEP768 with mask model:
  (4M48H, 5M48H, 0N35H, 1N35H)What’s new in VVDI PROG v3.9.2
+ add MC68HC05X32, MC68HC705X32 series
   mask Model:
  (0D62J, 1H52A, 0D69J, 1D69J, 2D69J)
  (Need to use MC68HC05X adapter)
* Fixed ID reading issue on MC9S12XE series
* Fixed EEE writing issues on MC9S12XE series
* Modify Audi J518 wiring diagram

VVDI Prog Features:

The built-in update software allows user to update VVDIProg firmware timely
High-speed USB communication interface enable the software automatically connect.
Smart operation mode: the possible causes of error will be listed
Supply power via USB cable, the software will automatically prompt if the external USB power supply is needed.

How to update Xhorse VVDI-PROG VVDI PROG super programmer?
1) Connect the device with the USB wire for the computer
2) Click on the following start online upgrade button to upgrade
3) Waiting for the upgrade to complete


Customer Feedback on VVDI2 Commander Key Programmer

Q:Is there only 5th BDM without 5th coil in vvdi2 package?
A:Since 5th coil had been connected with VVDI unit, and difficult to connect BDM. So it is single one 5th BDM with the vvdi2 package.

Q:What’s CAS Plug of VVDI2 used for?
A:CAS Plug can be used to read EWS CAS1.2.3 with vvdi2. The CAS4 4th and 5th coil had been connected on VVDI2 unit already.

Q:Does VVDI2 support BMW CAS4+ keys ?
A:Yes, it can.

Q:Which kind way to use VVDI2 program bmw keys, via OBD2 or via CAS ?
A:Pls refer to BMW Multi Tool instructions ,since VVDI2 is with same function with BMW Multi Tool.

Q: What’s difference between Xhorse VVDI2 and VVDI Prog ?
A: please check the table list below.

Xhorse VVDI 2 Xhorse VVDI Prog
Update online online
Language English English
Function Diagnose
Odometer correction
ECU programming
Key programming
Key learn
Program EEPROM
Program ECU
Program MCU
Pin code calculation
operation system XP and WIN7 XP and WIN7
Tool function covered VVDI 2=VVDI options + BMW Multi Tool options+Porsche options+J2534(free)+ Tango(free)+Remote control generation(free)…..and other functions VVDI PROG=(BMW ISN READ)+(EERPOM read)+(mcu read MOTO 9S12,5M48****) + PIN Code Calculation(more pin coder
Algorithm ,than 40 type)



Can Clip for Renault Software V152 New Features Added

Features of Can Clip for Renault Software Between Version V152 and Version V151 

Differences List:

V152 New Features: Fitted in new vehicle: XFD.
V151 New Features: Fitted in new vehicle: XBA.

Similarity List:

Operations: Reading of the diagnostics cards via the RNFI token

Gerneral Information:
Maintenance of the PANASONIC CF18s ceased in May 2014 and they can no longer be registered.

Attention: When CLIP is closed, the connection window appears for the token and password must be entered so that the diagnostics card can be read. This is the same for both V151 and V152 Renault Can Clip software.

V152 Renault CAN Clip Software Display



Renault CAN Clip Software Download

Customer Share on Autel MaxiCheck Pro ABS SRS EPB TPMS

Q: Can I use Special Application Diagnostics MaxiCheck Pro Diagnostics Tool to clearn the fault code?
A: Yes, you can.

Q: If the language for the Autel MaxiCheck Pro ABS SRS EPB SAS TPMS Oil Light Service Reset Tool is multi-language?
A: Sorry to tell you that this MaxiCheck Pro only has English.

Q: The Special Application Diagnostics MaxiCheck Pro can support the regeneration of the Mazda CX-7 DPF or not?
A: Please check the support Mazda car list from bellow:







Q: I want to know whether the Special Application Diagnostics MaxiCheck Pro can do the EOBD engine fault code function?
A: In theory, it can do. But it does not mean that the MaxiCheck Pro can support every car model.

How to update xtool products?

As usual, the customer need to register on Xtool official website and fill in the dealer code, then start to update your Xtool tool.

Now the Xtool upgrate tool Loginv2.0.39.0 released, if you own our original Xtool products, you can download the update tool and install it, then enter the device serial number and password to update the device directly.
Note: You may need to close antivirus software or allow an exception during updating the Xtool products.