MaxiSys MS908P do Mercedes Benz SCN Coding Successfully

Autel MaxiSYS Pro MS908P Diagnostic can do online programming and compatible with a part of the original diagnostic software, print out recorded data anytime and anywhere with Wi-Fi technology. Recently Maxisys MS908P has been tested working on Mercedes Benz SCN Coding using together with with Autel MF2534 J2534 ECU MaxiFlash Pro.

autel-maxisys-pro-ms908p-with-wifi

Here’s the step by step guide to do Benz SCN Coding with ms908p with J2534 ECU programmer .

1. Correctly connect Autel MS908P to J2534 ecu programming device and Mercedes

 

start MS908P

select Diagnosis

select Europe->Benz

2. Diagnostic program initializing…

select Automatic selection

turn ignition on

reading VIN…

acquire VIN info

select date of manufacturer: as of 12/2015

please select the steering

here, press button Right to select right-hand steering

confirm vehicle info

select Programming

system data loading…

diagnostic system initializing…

select ME-SFI-Gasoline engine control

diagnostic system initializing…

3. Select Control Module programming, but no newer control module software was found out

ms980p-work-with-scn-coding

 

Establishing vehicle communication…

Check network connection if it’s good

 

then go to SCN coding

Bluetooth is forced to stop

enter VIN as a 17-digit code

Two steps to perform SCN coding:

– step 1 Get SCN data from Server

– step 2 Perform SCN coding

4. Establishing vehicle communication

Checking network connection

 

Perform SCN coding completed.

Mercedes SCN coding sequence has been completed successfully with MS908P!

If you want a cheap professional Mercedes benz diagnostic programming tool to do mb star scn coding, you can choose MB SD C4 with newest hardware and software.

Then How to process this online coding service?

1. Place an order on our website for this online scn coding service.
2. Contact our online customer service or add our skype/msn/yahoo for us to process this online coding.
3. Prepare MB SD Star C4, car, laptop and teamviewer.
4. Choose the car model and programming system (eg, headlight XALWA-L)
5. Choose CONTROL unit adaptations
6. Choose offline program (CONTROL MODULE PROGRAMMING) then (SCN coding)
7. Give us teamviewer id and password.
8. Login server (DALMLER)
9. Login server and finish SCN coding automotively

(Visited 947 times, 1 visits today)