JDiag Elite J2534 Testing on Volvo VIDA DAS/Xentry Techstream ODIS

JDiag Elite J2534 Diagnostic and Coding Programming Tool is the most validated and accepted J2534 device in the world. It has been on the market longer than any other J2534 device, JDiag Elite J2534 has been approved by more automakers than any other product, and has been called the “golden standard” by customers and competitors alike.

JDiag Elite J2534 Highlights:

1.Support comprehensive diagnosis, module programming, key programming, data monitoring
2. With JDiag Tablet touch screen.
3. Software pre-installed.
4. Free online update for lifetime. Official website http://www.JDiag.com
5. Four systems are available in the tablet,3*WIN7,64Bit;1*WIN8.1,64Bit
6.Global Version, no region limitation.

JDiag Elite work with Benz Demo Video

1. Open DAS/Xentry select the car you want to work with
2. Connect usb cable to laptop, OBDII cable to car OBDII port
3. Switch the ignition on
4. Go to test it.
5. Choose the details functions you want to work with.
Note: The Jdiag DAS Xentry need no activate.

JDiag Elite work with ODIS Demo Video

1. Open the ODIS v3.0.1 software on desktop
2. Connect JDiag to laptop usb and OBDII cable to car OBDII port
3. Choose JDiag hardware. (You must firstly choose the correct brand. Here we work with VW, so we switch the brand.)
Choose the singal module to read out information.(Here we just connect to engine control module, if you connect to car, it can be read out full info, wait till the right bottom percentage to 100%)
4. Then work with it.

JDiag Elite work with Toyota Demo Video

1. Open the Techstream software on desktop
2. Connect JDiag to laptop usb and OBDII cable to car OBDII port
3. Scan to identify the vehicle automatically
JDiag Elite work with Volvo dice Demo Video

1. Open the DICE ALL-IN-OINE software on desktop (must make sure the status of VIDA is running)
input the user ID “1” to login
2. Connect JDiag to laptop usb and OBDII cable to car OBDII port
3. Choose JDiag hardware. (Click read vehicle to read out car information.)
4. Then work with it. (Then to work with details functions of the car.)
Consult plus
JDiag Elite work with Nissan Demo Video

1. Open the Consult plus software on desktop
2. Connect JDiag Elite to laptop usb and OBDII cable to car OBDII port
3. Choose JDiag hardware.
Choose the signal module to read out information.
(You can also choose by car type.)
4. Then work with it.

(Visited 385 times, 2 visits today)