JDiag Elite J2534 is a new generation J2534 tool made by JDiag Inc. JDiag Elite J2534 diagnostic and coding programming Tool can perform module programming, diagnostic functions, key programming and data monitoring. JDiag Elite is built with JDiag Tablet touch screen features in the pre-installed software and free update for life time. JDiag Elite is compatible with 3 optional operation systems including WIN7,64Bit; WIN8.1,64Bit, and when you turn on the PC, you are supposed to choose a system and all are preinstalled.
1. Open DAS/Xentry
2. Connect USB cable to laptop, OBDII cable to car OBDII port.
3. Switch the ignition on
4. Go to test it, details as follows.
5. Press “F2”, Data are being determined, please wait.
Select “Cars”, click “F2”
6. Select “E-class/CLS”
7. Select W211
8.Wait…it will automatically initializing, checking….
9. Select “Control units”, data are being determined, please wait…
10. Select “Drive”
11. select ME-SF 2/8-Motor electronics 2.8-07, communication with the control module group gasoline engine is being established.
12. I herewith confirm that I have read the safety notes
13. Select “control unit version”
14. Select “actual values”
15. Select “preconditions for test”
16. Check engine at cold start and in warming-up phase