How to setup Ford VCM 2 IDS V100 on VMware Machine

Newest Software Ford IDS VCM 2 V100.01 (Chinese version) is released. Here the engineer share the steps to setup the ids v100 ford software multilanguage on vmware machine system.

1.install VMware
2. install Windows XP Professional and VMware Tools
3. reset date and time on on VMware
4. install Calibration
5. install ids-v91.01_full
6. check if IDS-91.01 is successfully installed or not
7. install Ford-IDS-V100.01-full
8. install VCMII Driver
9. Install the software for USB Serial Converter
10. Install the software for USB Serial Port
11. diagnosis with IDS 100.01

IDS VCM2 Operating system:

Windows XP
Windows 7
VMware Player

Free download:

Ford IDS 100.01 FULL.exe (tested OK on Ford VCM 2)

http://www.fordservicecontent.com/Ford_Content/IDS/IDS-100.01_Full.exe
Mazda IDS 100.exe (tested OK on VXDIAG VCX NANO for Mazda)

https://mega.nz/#!lhpDVZZJ!qr4QEP1YBH4IBuT1WaSmn7-SF2S6954_paYJqpHmjds
Ford-ids-98.01.zip (tested good on VXDIAG NANO & VCM II)

http://www.chinaautodiag.com/download/ids-98.01.zip
Mazda_IDS_98.00.zip (tested good on VXDIAG NANO & VCM II)

http://www.chinaautodiag.com/download/Mazda_IDS_98.00.zip

Device to work with IDS v100 software:

VCM 2 clone (SP177，SP177-1，SP177-C，SP177-G)
Vxdiag Vcx Nano Wifi SP239-W

NOTE: You may be risky to try on other vcm II devices.

Clone vcm ii functions:
1. Programming & Installation of new ECUs
(PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.)
2. Live Data-stream with Recording & Playback Functions for Main ECUs
3. Read & Clear Diagnostic Trouble Codes (DTCs)
4. New Software Re-flash for Existing ECUs
5. Set, Adjust or Remove Speed Governors
6. Automatic vehicle recognition
7. All Other Dealer Functions
8. Guided Fault Finding
9. Steering Angle Resets
10. Program New Keys
11. DPF Regeneration
12. Brake Bleeding
13. Injector Coding

ids-vcm-v100.01-1