How to use FVDI software USB dongle and add car software ?

The FVDI Software USB dongle work with FVDI commander help to realize the following functions:

1. AUDI A6/Q7 key learning
2. AUDI A6/Q7 VIN writing
3. AUDI A4/A5/A6/A8/Q5/Q7 component protection
4. AUDI A8, VW Touareg KESSY adaptation
5. VW MED17 EEPROM reading
6. BMW CAS3, encrypted CAS3+ key learning
7. BMW CAS3, encrypted CAS3+ mileage recalibration
8. Mercedes-Benz mileage recalibration
9. BWM CAS4 5M48h key Tool
10. Renault Key Learning for new model (2008~)
11. BMW EGS synchronization

Then How to use the FVDI software USB dongle?

1)Ensure there is good network connection environment
2)Run “ABRITES Quick start”. Select quick link icon on desktop and open “ABRITES quick”. Then select vehicle icon, software is running when the Dongle icon on the right-bottom of the desktop pops out.
3)Plug the software dongle into the computer/laptop
4)Run commander software
5)Because the Dongle and TAG key programmer connect to the same port of FVDI, so users cannot connect the USB Dongle and TAG software at the same time. When “Connect TAG programmer appears” message pops out, please disconnect the USB dongle as soon as possible and plug in the TAG key programmer quickly. After complete programming transponder, then connect the Dongle to carry out online function.

fvdi-softdog-01

NOTE: FVDI can only work on Windows XP (SP2 or SP3). It cannot work on VISTA or WIN 7.

How to add more car model software for FVDI commander?

1) Order one FVID commander and pay authorization for the additional software you want, we will activate the software authorization for you.

2) Or buy a FVDI with full 18 software at the price of €1,135.00  with one year using limitation.
After one year you need pay authorization fee again to continue use it.
One year time calculate from the day you purchased it.

 

(Visited 362 times, 1 visits today)