JMD Assistant HandyBaby OBD Adapter can read out data from Volkswagen cars with HandyBaby V8.0.0 or newer version.
JMD Assistant won ‘t write any data to cars, even in all key lost , so it won ‘t be locked when the car connect to the server in 4S.
HandyBaby reads data from JMD Assistant with RF, and it needs no any cables or computer during your work.
JMD Assistant Menu Display
Please charge with 5V/1A, you can charge with computer or power supply unit of smart phone, when charge the indicator turns red, when fully charged it turns green.
How to update JMD Assistant?
JMD Assistant connect to computer with USB cable, and open JMD Client software, click “UPDATES” – “JMD Assistant update”, then wait it until finish update.
Make sure your computer have install cp2012 driver and link to internet, and you should turn off Anti-virus and defender during update.
How to clone a new key with a original key via JMD Assistant ?
Step1: Insert the original key turn on
Step2: Insert JMD Assistant to OBD port
If the indicator on the dashboard spangled or re-light, don’t worryr this is ok.
After finish, you will hear beeper short “BiBiBi” by OBD that was OK and you can proceed to next step
After finish, you will hear beeper long “Biiiiiii” by OBD that mean it can’t be cloned yet (Please wait for our update)
Step3: Open Handy Baby and choose “More-fun”
Step9: Read Success by key data
Step10: Copy by JMD48 chip push OK
How to clone a new key if all key chip lost via JMD Assistant ?
Repeat the Step1 to Step5 above, then go on step6 shown as below.
If failed when reading, make sure you have follow the steps above and check the car is supported (see the list), or contact us.
JMD Assistant All key lost Support Models list
More cars will be added in the future version, please keep an eye on the latest version.
Some cars are not supported in the next half year of 2015 in the list, and blade shape remote key are not supported too.